Finishing Polish
피니싱 폴리시
A fine-abrasive finishing polish formulated to remove micro-scratches, holograms, and light defects from all paint types. It leaves a high-gloss finish and prepares the surface for a sealant or wax. Made in Germany; suited to use with the Nanolex Finishing or Medium polishing pad.
모든 도장에서 마이크로 스크래치, 홀로그램, 가벼운 결함을 제거하기 위한 미세 연마 마감용 폴리시입니다. 고광택 마감을 남기고 실란트나 왁스 도포 전 표면을 준비해 줍니다. 독일 제조이며 나노렉스 Finishing 또는 Medium 폴리싱 패드와 함께 사용하기를 권장합니다.
- Brand
- Nanolex
- Categories
- Exterior : Polishes
- Primary dilution
- RTU
- pH
- alkali (9)
Key features
- Fine-abrasive polish for the final correction step
- Removes micro-scratches and holograms
- Leaves a high-gloss finish on all paint types
- Suitable for solid, metallic, and pearl paints
- Works by machine or by hand
- Made in Germany
Dilution
- Exterior : Polishes — RTU (1:0) (primary)
Usage
- Wash and decontaminate the panel before polishing.
- Shake the bottle thoroughly before each use.
- Apply several pea-sized dots of polish onto a finishing or medium pad.
- Spread the polish at low speed across the section.
- Work with overlapping passes at moderate speed until the polish breaks down.
- Wipe the residue with a clean microfiber towel and inspect the finish.
- Follow with a sealant or wax once polishing is complete.
핵심 특징
- 마지막 보정 단계용 미세 연마 폴리시
- 마이크로 스크래치와 홀로그램 제거
- 모든 도장 타입에서 고광택 마감
- 솔리드, 메탈릭, 펄 도장에 사용 가능
- 머신과 수작업 모두 가능
- 독일 제조
사용법
- 폴리싱 전에 패널을 세차하고 디컨태미네이션합니다.
- 사용 전 보틀을 충분히 흔듭니다.
- Finishing 또는 Medium 패드에 콩알 크기 폴리시를 여러 점 도포합니다.
- 낮은 속도로 섹션 위에 폴리시를 펴 바릅니다.
- 폴리시가 풀어질 때까지 중간 속도로 겹치게 작업합니다.
- 깨끗한 마이크로화이버 타월로 잔여물을 닦고 마감을 확인합니다.
- 폴리싱이 끝나면 실란트나 왁스로 마무리합니다.
Also known as: 나노렉스, Nanolex Finishing Polish, Fine Polish, Final Polish, Hologram Remover Polish, 나노렉스 피니싱 폴리시, 마감 폴리시, 파인 폴리시, 홀로그램 제거 폴리시