Neutral Foam Shampoo
뉴트럴 폼 샴푸
A 2-in-1 neutral-pH car shampoo that works for bucket hand washing and foam-gun prewashing. The soft, lubricated foam encapsulates dirt to help avoid swirls and micro-scratches, preserves existing waxes and sealants including carnauba, dilutes up to about 1:400 for strong economy, and finishes with a bubble gum scent.
양동이 수작업 세차와 폼 건 프리워시에 모두 어울리는 2-in-1 중성 pH 카 샴푸입니다. 부드럽고 윤활성이 좋은 거품이 오염을 감싸 스월과 미세 스크래치를 줄여 주고, 카나우바를 포함한 기존 왁스와 실란트를 보호하며, 약 1:400까지 희석할 수 있을 만큼 경제적이고 버블검 향으로 산뜻하게 마무리됩니다.
- Brand
- MAFRA MANIAC LINE
- Categories
- Exterior : Bucket Car Shampoo, Exterior : Foam, Exterior : Pre-washing (Pretreatment)
- Primary dilution
- 1:133~1:400
- pH
- neutral
Key features
- 2-in-1 hand wash and foam-gun prewash
- Soft lubricated foam helps avoid swirls and micro-scratches
- Neutral-pH, ultra-concentrated with shine boost
- Respects existing protection including carnauba wax
- Soft compact foam film safe across surfaces
- High foam encapsulates dirt for streak-free rinsing
- Economical with dilution up to about 1:400
- Strong emollient action suited to foaming technique
- Bubble gum scent
Dilution
- Exterior : Bucket Car Shampoo — 1:133~1:400 (1:133-400) (primary)
- Exterior : Foam — 1:10 (1:10)
- Exterior : Pre-washing (Pretreatment) — 1:100 (1:100)
Usage
- For foam-gun prewash, dilute 1:10 and dispense across the vehicle from bottom to top.
- Wait about 4 minutes for the foam to thin without letting it dry, working in the shade on a cool body.
- Rinse high-pressure top to bottom, lifting the bulk of the dirt.
- For bucket hand wash, dilute 3 capfuls in 10 L of water (around 1:133) up to a maximum of about 1:400.
- Use a second bucket of clean water for the glove, start at the top of the wet vehicle, and work gently panel by panel.
- Rinse thoroughly and dry with a Super Dryer microfibre cloth, ideally one for body and one for glass.
핵심 특징
- 2-in-1: 양동이 수작업 세차와 폼 건 프리워시
- 부드럽고 윤활성 좋은 거품으로 스월·미세 스크래치 감소
- 중성 pH의 초농축, 광택 부스트
- 카나우바 등 기존 보호제 유지
- 모든 표면에 안전한 부드럽고 치밀한 거품 필름
- 풍부한 거품이 오염을 감싸 얼룩 없는 린싱
- 약 1:400까지 희석 가능한 경제성
- 폼 기법에 적합한 강한 에몰리언트 성질
- 버블검 향
사용법
- 폼 건 프리워시는 1:10으로 희석해 차량 전체에 아래에서 위로 도포합니다.
- 거품이 얇아질 때까지 약 4분 기다리되 그늘과 차가운 차체에서 작업해 거품이 마르지 않게 합니다.
- 위에서 아래 방향으로 고압 린싱하여 굵은 오염을 대부분 걷어냅니다.
- 양동이 수작업 세차에서는 물 10L에 제품 3캡(약 1:133)을 풀고, 최대 약 1:400까지 희석할 수 있습니다.
- 두 번째 양동이의 깨끗한 물에 글러브를 헹궈 가며, 젖은 차체 위쪽부터 패널 단위로 부드럽게 세차합니다.
- 충분히 헹군 뒤 Super Dryer 극세사 타월로 건조하며, 차체용과 유리용을 따로 두면 더 깔끔합니다.