Ultra Coat Bubble Shock Dilution Ratios & User Guide
버블 쇼크
Ultra Coat Bubble Shock — Exterior : Bucket Car Shampoo, acid pH, base dilution 1:4. At 1:4, mix about 250 ml of Ultra Coat Bubble Shock per 1 L of water. For a foam cannon or an exact bucket amount, use the Find Your Detail dilution calculator on the product page: https://findyourdetail.io/products/ultra-coat/bubble-shock
Ultra Coat 버블 쇼크 — Exterior : Bucket Car Shampoo, pH acid, 기본 희석 1:4. 1:4 기준 물 1L당 Ultra Coat 버블 쇼크 약 250ml. 폼캐논이나 정확한 버킷 용량은 제품 페이지의 Find Your Detail 희석 계산기에서 계산하세요: https://findyourdetail.io/products/ultra-coat/bubble-shock
Bubble Shock is an acidic-pH shampoo formulated for surfaces protected by ceramic coatings, effectively dissolving mineral deposits while maintaining coating integrity. Usable across multiple applications — two-bucket hand wash, foam gun pre-wash, and at high concentration as a water spot remover. Its sweet-and-sour Sicilian orange scent adds a pleasurable aspect to the wash process.
버블 쇼크는 세라믹 코팅 보호 차량에 적합한 산성 pH 샴푸로, 코팅 성능을 유지하면서 미네랄 침착물을 효과적으로 제거합니다. 투 버킷 세차, 폼 건 전처리, 고농도 물자국 제거 등 다양한 용도로 활용할 수 있으며, 시칠리아 오렌지의 새콤달콤한 향이 세차 작업을 더욱 즐겁게 합니다.
- Brand
- Ultra Coat
- Categories
- Exterior : Bucket Car Shampoo, Exterior : Foam, Exterior : Remover
- Primary dilution
- 1:4
- pH
- acid (2)
- Last updated
- 2026-07-06
How it works
- Cleaning surfactant — Lifts soil off the surface and disperses it in water.
- Glycol ether solvent — Dissolves oil film and traffic film; can soften some plastics and rubber.
- anionic surfactants — Ionic types of the surfactants used in this product.
Disclosed ingredients
| Ingredient | CAS | Function |
|---|---|---|
| Alcohols, C12-14, ethoxylated, sulfates, sodium salts (SLES) | 68891-38-3 | Anionic surfactant |
| Benzenesulfonic acid, 4-C10-13-sec-alkyl derivs. | 85536-14-7 | Anionic surfactant |
| 2-(2-Butoxyethoxy)ethanol (butyl diglycol) | 112-34-5 | Solvent |
Ingredients disclosed in the manufacturer's Safety Data Sheet. A safety data sheet lists hazardous components only, so this is not a full formula.
Key features
- Acidic pH safe for ceramic coatings
- Removes mineral deposits effectively
- Usable as bucket shampoo, foam pre-wash, or water spot remover
- High efficiency — small amount produces dense foam
- Quick and easy rinsing
- Sweet-and-sour Sicilian orange scent
Dilution
| Use | Dilution | Ratio |
|---|---|---|
| Exterior : Remover (primary) | 1:4 | 1:4 |
| Exterior : Foam | 1:9 | 1:9 |
| Exterior : Bucket Car Shampoo | 1:200~1:500 | 1:200-500 |
Usage
- Rinse the vehicle with pressurised water to remove loose dirt.
- Prepare the working solution at the appropriate dilution for your application method.
- Wash the car from top to bottom using a wash mitt.
- Rinse the entire surface thoroughly with pressurised water.
핵심 특징
- 세라믹 코팅에 안전한 산성 pH
- 미네랄 침착물 효과적 제거
- 버킷 세차, 폼 전처리, 물자국 제거 등 다용도 활용
- 소량으로도 풍부한 거품 생성 — 높은 효율
- 신속하고 간편한 헹굼
- 시칠리아 오렌지의 새콤달콤한 향
사용법
- 고압 물로 차량을 세척하여 표면의 오염을 제거합니다.
- 사용 방법에 맞게 적절한 희석 비율로 작업 용액을 준비합니다.
- 세차 장갑을 이용해 차량 위에서 아래 방향으로 세차합니다.
- 고압 물로 전체 표면을 철저히 헹굽니다.
Also known as: 울트라, 울트라코트, ultra, ULTRACOAT Bubble Shock, BS, ULTRACOAT BS, 울트라코트 버블 쇼크, 울트라코트 BS
Sources
Related products
More from Ultra Coat
More Bucket Car Shampoo products
- GOOD STUFF Sour Shampoo
- servFaces Shampoo Wash SW-N2010
- Soft99 Kiwami 'Extreme Gloss' Shampoo - White
- P&S Wash & Wax
- Ganbass Summer Shampoo
- Auto Finesse Lather Car Shampoo