Koch Chemie NanoCrystal Polish Dilution Ratios & User Guide

Koch Chemie NanoCrystal Polish dilution ratio and pH specification chart

나노크리스탈 폴리시

Koch Chemie NanoCrystal Polish — Exterior : Polishes, acid pH. See full specs and usage on the Find Your Detail product page: https://findyourdetail.io/products/koch-chemie/nanocrystal-polish

Koch Chemie 나노크리스탈 폴리시 — Exterior : Polishes, pH acid. 전체 사양·사용법은 Find Your Detail 제품 페이지에서 확인하세요: https://findyourdetail.io/products/koch-chemie/nanocrystal-polish

Foaming machine-wash polish built on a micro-emulsion that lays down a thick visible foam during application. Hydrophilic reactive ingredients deepen paint gloss while care components add a protective layer over paint, rubber, and exterior plastic, including soft tops on convertibles. Surfactants assist self-cleaning across cloth and brush wash media; mineral-oil-free and VDA Class A compliant.

마이크로 에멀젼을 기반으로 한 자동세차용 폼 폴리시로, 도포 시 풍성한 폼이 형성되어 시각적인 케어 효과를 함께 제공합니다. 친수성 반응 성분이 도장 광택을 깊게 살려 주고, 케어 성분이 도장면·고무·외장 플라스틱은 물론 컨버터블 소프트탑 표면까지 보호 막을 형성합니다. 계면활성제가 천·브러시 세차 미디어의 자가 세정을 도우며 광유 무함유, VDA 클래스 A 부합 제품입니다.

Brand
Koch Chemie
Categories
Exterior : Polishes
Primary dilution
RTU ~ 1:4
pH
acid (3)
Where to buy
Search on Amazon (US)
Last updated
2026-08-14

How it works

  • cationic surfactants — Ionic types of the surfactants used in this product.

Disclosed ingredients

IngredientCASFunction
Unidentified (polyether/polymer type)9004-78-8
Citric acid monohydrate5949-29-1Acid active
Amines, ethoxylated (ethoxylated fatty amines)61791-26-2Cationic surfactant

Ingredients disclosed in the manufacturer's Safety Data Sheet. A safety data sheet lists hazardous components only, so this is not a full formula.

Key features

  • Micro-emulsion foam polish
  • Hydrophilic reactive gloss components
  • Care for paint, rubber, plastic, soft tops
  • Mineral-oil-free, VDA Class A

Dilution

UseDilutionRatio
Exterior : Polishes (primary)RTU ~ 1:41:0-4

Usage

  1. Dose the polish either neat or diluted up to 1:4 through a metering pump on the wash line.
  2. Aim for roughly 10–20 ml of product distributed over each car as it passes through.
  3. Run a fresh-water rinse cycle after this stage before moving on to a dryer or wax application.

핵심 특징

  • 마이크로 에멀젼 폼 폴리시
  • 친수성 반응형 광택 성분
  • 도장·고무·플라스틱·소프트탑 케어
  • 광유 무함유, VDA 클래스 A

사용법

  1. 도징 펌프로 원액 그대로 또는 최대 1:4 희석 범위 안에서 투입합니다.
  2. 차량 1대당 약 10–20 ml 정도가 도포되도록 토출량을 맞춥니다.
  3. 이 단계 후 건조제나 왁스 도포 전에 깨끗한 물로 헹구는 사이클을 한 번 거칩니다.

Also known as: KCX, koch-chemie, 코흐, 코흐케미, NCP, Koch NCP, KC NCP, 코흐케미 나노크리스탈 폴리시, Foam Gloss Polish C

한국어로 보기

Sources

  • Koch Chemie official product page
  • Safety Data Sheet (SDS / MSDS)

Related products

More from Koch Chemie

  • Hand Block
  • Reactive Rust Remover
  • Dosing Valve (Impfbiene)
  • Wheel Brush small
  • Polishing Cloth Roll Nowolin White
  • Plastic Spray Paint Black

More Polishes products

  • Detail Artist RESIN REPAIR
  • Meguiar's DA Microfiber Finishing Wax
  • Ganbass GBS-L
  • DIY Detail Gold Standard Compound
  • Meguiar's Ultra Finishing Polish M205
  • Chemical Guys InSynchro V45 Supreme Finish Polish

Explore more

  • Category, comparison & dilution guides
  • What detailers actually use (video breakdowns)