Koch Chemie Spotless Ceramic Finish Dilution Ratios & User Guide
스팟리스 세라믹 피니쉬
Koch Chemie Spotless Ceramic Finish — Exterior : Remover. See full specs and usage on the Find Your Detail product page: https://findyourdetail.io/products/koch-chemie/spotless-ceramic-finish
Koch Chemie 스팟리스 세라믹 피니쉬 — Exterior : Remover. 전체 사양·사용법은 Find Your Detail 제품 페이지에서 확인하세요: https://findyourdetail.io/products/koch-chemie/spotless-ceramic-finish
Mineral-stain remover formulated to lift water spots and limescale deposits from ceramic-coated paint without harming the coating. Works on bodywork that has been sealed with the Cb0.01 / C0.02 ceramic systems and is straightforward to apply on standard paint as well.
세라믹 코팅된 도장면에서 워터 스팟과 석회 자국을 코팅 손상 없이 들어내기 위해 제조된 미네랄 얼룩 제거제입니다. Cb0.01·C0.02 세라믹으로 실링된 차체에서도 안전하게 작동하며, 일반 도장 표면에도 어렵지 않게 사용할 수 있습니다.
- Brand
- Koch Chemie
- Categories
- Exterior : Remover
- Primary dilution
- RTU
- Where to buy
- Search on Amazon (US)
- Last updated
- 2026-08-14
How it works
- Glycol ether solvent — Dissolves oil film and traffic film; can soften some plastics and rubber.
- Mild acid — Mild acids such as citric acid break down mineral soiling.
- Solvent-based — Built mainly on organic solvents; ventilate and spot-test on interior plastics.
Disclosed ingredients
| Ingredient | CAS | Function |
|---|---|---|
| 2-(2-Butoxyethoxy)ethanol (butyl diglycol) | 112-34-5 | Solvent |
| 1-Butoxy-2-propanol (propylene glycol n-butyl ether) | 5131-66-8 | Solvent |
| 1-Methoxy-2-propanol (PM) | 107-98-2 | Solvent |
| Siloxanes and silicones, 3-[(2-aminoethyl)amino]propyl Me, di-Me | 71750-79-3 | Film former |
| Glycolic acid | 79-14-1 | Acid active |
Ingredients disclosed in the manufacturer's Safety Data Sheet. A safety data sheet lists hazardous components only, so this is not a full formula.
Key features
- Lifts water and limescale spots
- Safe over Cb0.01 / C0.02 coatings
- Microfibre application
- Up to 3 minute dwell time
Dilution
| Use | Dilution | Ratio |
|---|---|---|
| Exterior : Coating (primary) | RTU | 1:0 |
Usage
- Heavily soiled bodywork should be cleaned thoroughly first, including a pre-wash such as Green Star on ceramic-coated cars.
- Wash the vehicle with Reactivation Shampoo as instructed, rinse well and dry the surface completely.
- Spray the product into a microfibre cloth and wipe across the affected panel until a thin film is visible.
- Let it act for up to 3 minutes depending on staining, then buff off with a professional microfibre cloth.
- Follow up with a clean dry microfibre cloth if any residue remains.
- Shake before use, keep the bottle from frost or excessive heat, and avoid working on warm panels or in direct sun.
핵심 특징
- 워터·석회 얼룩 제거
- Cb0.01·C0.02 코팅과 양립
- 극세사 도포 방식
- 최대 3분 반응 시간
사용법
- 심하게 오염된 차체는 먼저 충분히 세정하고, 세라믹 코팅 차량에는 Green Star 같은 프리워시를 진행합니다.
- Reactivation Shampoo로 안내에 따라 세차한 뒤 잘 헹구고 표면을 완전히 건조시킵니다.
- 스프레이를 극세사 천에 직접 뿌린 다음 패널 위에 얇은 막이 보이도록 고르게 발라 줍니다.
- 얼룩 정도에 따라 최대 3분간 반응시킨 후 프로용 극세사 천으로 닦아 광을 냅니다.
- 잔여물이 남아 있으면 깨끗하고 마른 극세사 천으로 한 번 더 닦아냅니다.
- 사용 전 흔들고, 동결과 과도한 열을 피해 보관하며, 따뜻한 패널이나 직사광선 아래에서는 작업하지 않습니다.
Also known as: KCX, koch-chemie, 코흐, 코흐케미, SCF, Koch SCF, KC SCF, 코흐케미 스팟리스 세라믹 피니쉬, Water Stain Remover
Sources
Related products
More from Koch Chemie
- ProtectorWax
- Abwasserkoffer Profi
- Bucket
- Colourlock Leather Care
- Fragrance Concentrate Raspberry
- Gentle Hand Protect
More Remover products
- Nanolex Professional Glue EX
- Alchimy7 G7 ULTRA
- Shine Supply Tarminator
- Garage Therapy /ZERO: WSR
- Ganbass Water Stain Remover
- Car Gods Iron Fallout Eliminator