Koch Chemie Micro Cut & Finish P3.01 Dilution Ratios & User Guide
마이크로 컷 앤 피니시 P3.01
Koch Chemie Micro Cut & Finish P3.01 — Exterior : Polishes. See full specs and usage on the Find Your Detail product page: https://findyourdetail.io/products/koch-chemie/micro-cut-and-finish-p3-01
Koch Chemie 마이크로 컷 앤 피니시 P3.01 — Exterior : Polishes. 전체 사양·사용법은 Find Your Detail 제품 페이지에서 확인하세요: https://findyourdetail.io/products/koch-chemie/micro-cut-and-finish-p3-01
Machine micro-polish formulated to clear holograms, hazing, and very fine scratches from automotive paint. Aimed at the finishing stage of correction work on cars, motorcycles, and commercial vehicle bodies.
도장면에 남은 홀로그램, 미세 헤이즈, 잔 스크래치를 정리하기 위한 머신 마이크로 폴리시입니다. 승용차, 모터사이클, 상용차 차체의 마무리 보수 단계에 활용됩니다.
- Brand
- Koch Chemie
- Categories
- Exterior : Polishes
- Primary dilution
- RTU
- Where to buy
- Search on Amazon (US)
- Last updated
- 2026-08-14
How it works
- Petroleum solvent — Dissolves tar and grease; best not left to dwell on paint.
Disclosed ingredients
| Ingredient | CAS | Function |
|---|---|---|
| Naphtha (petroleum), hydrotreated heavy | 64742-48-9 | Solvent |
Ingredients disclosed in the manufacturer's Safety Data Sheet. A safety data sheet lists hazardous components only, so this is not a full formula.
Key features
- Tuned for finishing stage
- Targets holograms and hazing
- Compatible with rotary or forced-rotation orbital
- Pair with Micro Cut Pad
Dilution
| Use | Dilution | Ratio |
|---|---|---|
| Exterior : Polishes (primary) | RTU | 1:0 |
Usage
- Pre-wet a Micro Cut Pad with polish so the foam carries enough product before the first pass.
- With the machine off, smear the polish across the panel; use a forced-rotation orbital like Makita PO5000C at top speed or a rotary polisher.
- Work crosswise with medium pressure to break the polish, then drop to light pressure as the finish refines.
- Wipe residue with a non-chainstitched ultrasonic-cut Profi microfibre, and reserve these pads only for this product.
핵심 특징
- 마무리 단계 전용
- 홀로그램·미세 헤이즈 정리
- 로터리·강제회전 오비탈 호환
- 마이크로 컷 패드와 짝
사용법
- 마이크로 컷 패드에 폴리시를 충분히 적셔 첫 패스에 약제가 부족하지 않도록 합니다.
- 머신을 끈 상태에서 폴리시를 패널에 펴 바른 뒤, 마키타 PO5000C 같은 강제 회전 오비탈을 최고 속도로 두거나 로터리 폴리셔를 사용합니다.
- 중간 압력으로 십자 패스해 폴리시를 분해하고, 도장이 정리되면 압력을 낮춰 마무리합니다.
- 초음파 컷 처리된 비체인스티치 프로피 마이크로파이버 천으로 잔여물을 닦고, 해당 패드는 이 제품 전용으로만 사용합니다.
Also known as: KCX, koch-chemie, 코흐, 코흐케미, MCF, Micro Cut, Koch MCF, KC MCF, 코흐케미 마이크로 컷 앤 피니시, 마이크로 컷 P3.01, P3.01, koch P3.01, 코흐 P3.01, 코흐케미 P3.01
Sources
Related products
More from Koch Chemie
- Acid Shampoo A
- Fragrance Concentrate Ice Tea
- Quick & Shine
- MultiInteriorCleaner
- Vinyl Remover Drill Adapter
- THE FINISHER PowerSpeedPolish
More Polishes products
- Sonax PROFILINE EX 04-06
- Vonixx V-Finish
- P&S Deep Finish Restoration Polish
- SWAG BOOST POLISH PAD PRIMER+
- OPTI-COAT Optimum Hyper Compound Revision 5 Spray
- Shine Supply Classic Cut Plus