Green Star 96
그린 스타 96
Alkaline all-purpose concentrate without phosphates or solvents that lifts traffic film, oil, and general grime. Suited to workshop and industrial floors, vehicle interiors and exteriors, and engine bays, with corrosion inhibitors that protect anodised aluminium and similar trim. Holds VDA Class A status and quick-release certification per ÖNORM 5105.
인산염과 용제를 뺀 알칼리 농축 만능 클리너로, 도로 오염·기름때·일반 오염을 끌어내는 데 무게를 뒀습니다. 작업장 바닥과 산업 시설은 물론 차량 내·외장과 엔진 룸까지 사용 영역이 넓고, 부식 억제제가 들어가 양극산화 알루미늄 같은 민감한 부품도 함께 다룰 수 있습니다. VDA 클래스 A 인증과 ÖNORM 5105 신속 분리 기준을 충족합니다.
- Brand
- Koch Chemie
- Categories
- Exterior : Pre-washing (Pretreatment), Exterior : Degreaser&Dewaxing, Interior : Trim Cleaner, Interior : Fabric Cleaner
- Primary dilution
- 1:4~1:20
- pH
- alkali
Key features
- Phosphate- and solvent-free concentrate
- Corrosion inhibitors for aluminium trim
- VDA Class A compliant
- ÖNORM 5105 quick-release
- All-purpose: cars, trucks, floors, engines
Dilution
- Exterior : Pre-washing (Pretreatment) — 1:4~1:20 (1:4-20) (primary)
- Exterior : Degreaser&Dewaxing — 1:4~1:20 (1:4-20)
- Interior : Fabric Cleaner — 1:7~1:15 (1:7-15)
Usage
- On vehicle exteriors and engines, dilute 1:4 to 1:20, coat the area, allow a short dwell, and flush with a high-pressure washer.
- On interiors and textiles, work at 1:7 to 1:15 and pull residues with a damp cloth or a wet/dry vacuum.
- On workshop and industrial floors, run a 1:30 to 1:90 mix as the contamination dictates.
- Stay inside VDA Class A: keep dwell under 5 minutes and concentration no stronger than 1:2.
- Skip hot panels, never let the solution dry, and confirm material compatibility before applying.
핵심 특징
- 인산염·용제 무함유 농축 처방
- 알루미늄 부품용 부식 억제제 함유
- VDA 클래스 A 인증
- ÖNORM 5105 신속 분리
- 차량·트럭·바닥·엔진 등 다용도
사용법
- 차량 외장과 엔진에는 1:4~1:20으로 희석해 전체 면에 도포하고, 짧게 반응시킨 뒤 고압 세척기로 충분히 흘려 보냅니다.
- 실내와 직물에는 1:7~1:15 농도로 사용하고, 잔여물은 젖은 천이나 건습식 청소기로 거두어 냅니다.
- 작업장 바닥과 산업 시설 바닥에는 오염 정도에 따라 1:30~1:90 비율로 운용합니다.
- VDA 클래스 A 기준 안에서 작업하며, 반응 시간은 5분 이내, 농도는 1:2 이하를 유지합니다.
- 뜨거운 면에는 사용하지 않고 마르기 전에 처리하며, 시공 전 소재 호환성을 미리 확인합니다.