Adam's All Purpose Cleaner
아담스 올 퍼포스 클리너 (APC)
Adams All Purpose Cleaner is a highly concentrated, citrus-scented formula that tackles heavy grease, grime, and buildup at full strength while remaining safe when diluted for delicate surfaces. It works across rubber, wheels, engine bays, vinyl, carpet, and canvas, and can be loaded into a foam cannon for thorough paint decontamination.
고농축 시트러스 향 포뮬러로, 원액 상태에서는 강력한 기름때와 오염을 제거하고 희석하면 민감한 표면에도 안전하게 사용할 수 있습니다. 휠, 엔진룸, 카펫, 비닐 등 차량 내외부 전반에 활용할 수 있어 하나로 다양한 세정 작업을 해결합니다.
- Brand
- Adam's Polishes
- Categories
- Exterior : Pre-washing (Pretreatment), Interior : Trim Cleaner, Exterior : Foam, Interior : Fabric Cleaner, Exterior : Degreaser&Dewaxing
- Primary dilution
- 1:5~1:10
- pH
- alkali (12)
Key features
- Heavy-duty, full-strength degreasing
- Ultra-concentrated formula
- Cleans, degreases, and decontaminates
- Dilutable for delicate surfaces
- Citrus scent, neon-yellow color
- Made in the USA
Dilution
- Exterior : Degreaser&Dewaxing — 1:5~1:10 (1:5-10) (primary)
- Exterior : Pre-washing (Pretreatment) — 1:10 (1:10)
- Interior : Trim Cleaner — 1:20~1:300 (1:20-300)
- Exterior : Foam — 1:10 (1:10)
- Interior : Fabric Cleaner — 1:20~1:300 (1:20-300)
Usage
- Dilute the cleaner with water to match the surface: about 1:5 to 1:10 for heavy exterior degreasing, about 1:10 for pre-wash or foam cannon use, and about 1:20 to 1:30 for interior carpet and delicate surfaces.
- Spray the diluted solution generously onto the surface or onto a utility towel, then allow brief dwell time without letting it dry.
- Agitate with a brush, wash mitt, or microfiber towel to release stubborn dirt, grease, and grime.
- Rinse immediately with a strong blast of water and dry promptly; on delicate interior areas, wipe with a damp microfiber towel instead of rinsing.
- If heavy soiling remains, repeat the process or increase the concentration ratio.
핵심 특징
- 원액 사용 가능한 고강도 탈지력
- 초고농축 포뮬러
- 세정·탈지·디컨 동시 수행
- 민감한 표면에는 희석하여 사용
- 시트러스 향, 네온 옐로우 색상
- 미국 제조
사용법
- 표면에 따라 물로 희석하세요: 휠·엔진룸 등 강한 탈지에는 약 1:5~1:10, 도장 프리워시·폼캐논에는 약 1:10, 카펫·실내 민감 표면에는 약 1:20~1:30이 적절합니다.
- 희석액을 표면이나 유틸리티 타올에 충분히 분사하고 마르지 않도록 짧게 반응시키세요.
- 브러쉬, 워시 미트, 또는 극세사 타올로 문질러 고착된 오염과 기름때를 풀어내세요.
- 물로 즉시 강하게 헹군 뒤 빠르게 건조하세요; 민감한 실내 표면은 헹구는 대신 젖은 극세사 타올로 닦아내세요.
- 오염이 남아 있으면 과정을 반복하거나 더 진한 희석 비율로 재작업하세요.