ADBL Traffic Film Remover Dilution Ratios & User Guide

ADBL ADBL Traffic Film Remover dilution ratio and pH specification chart

ADBL 트래픽 필름 리무버

ADBL Traffic Film Remover — Exterior : Pre-washing (Pretreatment), alkali pH, base dilution 1:20~1:100. At 1:20, mix about 50 ml of ADBL Traffic Film Remover per 1 L of water. For a foam cannon or an exact bucket amount, use the Find Your Detail dilution calculator on the product page: https://findyourdetail.io/products/adbl/adbl-traffic-film-remover

ADBL 트래픽 필름 리무버 — Exterior : Pre-washing (Pretreatment), pH alkali, 기본 희석 1:20~1:100. 1:20 기준 물 1L당 ADBL 트래픽 필름 리무버 약 50ml. 폼캐논이나 정확한 버킷 용량은 제품 페이지의 Find Your Detail 희석 계산기에서 계산하세요: https://findyourdetail.io/products/adbl/adbl-traffic-film-remover

An alkaline traffic film remover for pre-washing all types of vehicles. Its low-foaming, two-phase formula speeds the penetration and lifting of road grime and works without agitation while staying gentle on cleaned surfaces.

모든 차종의 프리워시용 알칼리성 트래픽 필름 리무버입니다. 저발포 2상 포뮬러가 도로 오염의 침투와 분리를 가속하며, 문지르지 않아도 작용하고 세척면에 부드럽습니다.

Brand
ADBL
Categories
Exterior : Pre-washing (Pretreatment)
Primary dilution
1:20~1:100
pH
alkali (12)
Last updated
2026-06-04

Key features

Dilution

UseDilutionRatio
Exterior : Pre-washing (Pretreatment) (primary)1:20~1:1001:20-100

Usage

  1. Pre-rinse the vehicle with water to remove loose dirt.
  2. Apply diluted product evenly with a pressure washer or pump sprayer, working bottom to top.
  3. Let it dwell a few minutes without allowing it to dry; keep out of direct sun.
  4. Rinse thoroughly with water.

핵심 특징

  • 도로 오염막을 녹이는 알칼리성 프리워시
  • 저발포 2상 포뮬러
  • 문지르지 않아도 작용
  • 세척면에 안전

사용법

  1. 물로 차량을 예비 헹굼하여 굵은 오염을 제거합니다.
  2. 희석한 제품을 고압세척기나 펌프 분무기로 하단에서 상단으로 균일하게 도포합니다.
  3. 마르지 않도록 직사광선을 피해 몇 분간 둡니다.
  4. 물로 충분히 헹굽니다.

Also known as: Traffic Film Remover, ADBL TFR, TFR

한국어로 보기

Sources

Related products

More from ADBL

More Pre-washing (Pretreatment) products

Explore more