Jax Wax Cannon Soap Dilution Ratios & User Guide

Jax Wax Cannon Soap dilution ratio and pH specification chart

캐논 솝

Jax Wax Cannon Soap — Exterior : Foam, neutral pH, base dilution 1:8~1:17. At 1:8, mix about 125 ml of Jax Wax Cannon Soap per 1 L of water. For a foam cannon or an exact bucket amount, use the Find Your Detail dilution calculator on the product page: https://findyourdetail.io/products/jax-wax/cannon-soap

Jax Wax 캐논 솝 — Exterior : Foam, pH neutral, 기본 희석 1:8~1:17. 1:8 기준 물 1L당 Jax Wax 캐논 솝 약 125ml. 폼캐논이나 정확한 버킷 용량은 제품 페이지의 Find Your Detail 희석 계산기에서 계산하세요: https://findyourdetail.io/products/jax-wax/cannon-soap

Cannon Soap is a pH-neutral, high-foaming car wash concentrate engineered for use in foam cannons and foam guns. Its dense, clinging suds encapsulate road film, dust, and grime, allowing contaminants to release before the wash mitt ever touches the paint. The concentrated formula preserves existing wax, sealant, and ceramic coating protection and rinses completely clean without streaks or surfactant haze.

캐논 솝은 폼 캐논과 폼 건 사용에 최적화된 pH 중성 고발포 세차 농축액입니다. 진하고 밀착력 있는 거품이 도로 오염물, 먼지, 이물질을 감싸 세차 미트가 도장면에 닿기 전에 오염물이 분리되도록 합니다. 농축 성분은 기존 왁스, 실란트, 세라믹 코팅 보호층을 유지하며, 얼룩이나 잔여 계면활성제 없이 깔끔하게 헹궈집니다.

Brand
Jax Wax
Categories
Exterior : Foam
Primary dilution
1:8~1:17
pH
neutral (7)
Last updated
2026-06-19

Key features

Dilution

UseDilutionRatio
Exterior : Foam (primary)1:8~1:171:8-17

Usage

  1. Rinse the entire vehicle thoroughly to remove loose dirt and grit before washing.
  2. Fill the foam cannon or foam gun reservoir with cool water and add 2 to 4 oz of Cannon Soap per liter, then shake gently to combine.
  3. Apply an even, thick layer of foam over the entire vehicle working from top to bottom, and allow it to dwell for one to two minutes.
  4. Follow with a two-bucket contact wash for a full detail, or rinse off completely for a touchless maintenance wash.
  5. Rinse from top to bottom and dry promptly with a clean microfiber towel.

핵심 특징

  • 폼 캐논 및 폼 건 전용 설계
  • pH 중성 — 왁스, 실란트, 세라믹 코팅 보호층 유지
  • 오염물을 감싸는 진한 밀착 거품
  • 고농축: 리터당 2~4 oz 사용
  • 잔여물 없이 깔끔하게 헹궈짐
  • 클리어코트, 비닐 랩, 무광 도장, 유리, 알루미늄에 안전
  • 미국 생산

사용법

  1. 세차 전 차량 전체를 충분히 헹궈 느슨한 오염물과 이물질을 제거합니다.
  2. 폼 캐논 또는 폼 건 용기에 냉수를 채우고 리터당 캐논 솝을 2~4 oz 넣은 뒤 가볍게 흔들어 섞습니다.
  3. 차량 위에서 아래 방향으로 거품을 두껍고 고르게 도포한 후 1~2분간 방치합니다.
  4. 정식 세차는 투 버킷 방식으로 미트 세차를 진행하고, 유지 세차는 물로 바로 헹궈냅니다.
  5. 위에서 아래 방향으로 헹군 뒤 깨끗한 마이크로파이버 타월로 신속히 물기를 닦아냅니다.

Also known as: 잭스 왁스, 잭스왁스, 잭스, jax, jaxwax, Jax Wax Cannon Soap, Jax Cannon Soap, JW Cannon Soap, CS, Jax Wax CS, Jax CS, JW CS, 잭스왁스 캐논 솝, 잭스왁스 CS

한국어로 보기

Sources

Related products

More from Jax Wax

More Foam products

Explore more