Snow Foam Combo2
스노우 폼 콤보2
Snow Foam Combo2 is one of ValetPRO’s stronger alkaline pre-wash foams, made to tackle heavy traffic film, oil residue and bug splats. The thick, clinging foam sticks to vertical panels for useful dwell time, and the controlled pH of around 10.5 keeps cleaning power high while remaining aluminium safe. Suitable through a foam lance or as a pump-spray pre-wash.
스노우 폼 콤보2는 발렛프로의 강한 알칼리성 프리워시 폼 중 하나로, 무거운 트래픽 필름, 오일 잔여물, 벌레 자국을 분해하도록 만들어졌습니다. 두껍게 달라붙는 폼이 수직면에서도 흘러내리지 않아 충분한 작용 시간을 확보하며, 약 10.5의 조절된 pH로 강한 세정력을 내면서 알루미늄에도 안전합니다. 폼랜스 또는 펌프 스프레이 프리워시로 사용할 수 있습니다.
- Brand
- ValetPRO
- Categories
- Exterior : Foam, Exterior : Pre-washing (Pretreatment)
- Primary dilution
- 1:3~1:9
- pH
- alkali (10.5)
Key features
- Strong alkaline pre-wash foam
- Cuts through traffic film and oily residue
- Helps remove aged wax or sealant
- Aluminium safe
- Controlled pH around 10.5
- Dilutes up to 1:15
Dilution
- Exterior : Foam — 1:3~1:9 (1:3-9) (primary)
- Exterior : Pre-washing (Pretreatment) — 1:10~1:15 (1:10-15)
Usage
- With a foam lance dilute Snow Foam Combo2 between 1:3 and 1:9 depending on foam thickness desired.
- Lay the thick foam evenly across the whole vehicle using the foam lance.
- Let it dwell for a few minutes without letting it dry on the panels.
- Pressure wash off thoroughly, working from the bottom upward.
- As a pump-spray pre-wash dilute 1:10, target lower panels and heavy soiling, dwell briefly, then rinse.
- For best results work on a cool vehicle in the shade.
핵심 특징
- 강한 알칼리성 프리워시 폼
- 트래픽 필름과 오일 잔여물 분해
- 오래된 왁스·실란트 제거에 도움
- 알루미늄에 안전
- 약 pH 10.5의 조절된 산도
- 최대 1:15까지 희석 가능
사용법
- 폼랜스 사용 시 원하는 폼 두께에 따라 1:3에서 1:9 사이로 희석합니다.
- 폼랜스로 차량 전체에 두꺼운 폼을 고르게 도포합니다.
- 패널에서 마르지 않도록 주의하며 수 분간 머무르게 합니다.
- 압력 세척기로 아래쪽부터 위쪽으로 충분히 헹궈냅니다.
- 펌프 스프레이 프리워시 시 1:10으로 희석해 하부 패널과 오염이 심한 부위에 분사 후 잠시 두었다가 헹굽니다.
- 최상의 결과를 위해 그늘에서 차가운 차량 상태로 작업합니다.