Auto Glym Polar Blast Dilution Ratios & User Guide

Auto Glym Polar Blast dilution ratio and pH specification chart

폴라 블래스트

Auto Glym Polar Blast — Exterior : Foam, neutral pH, base dilution 1:5. At 1:5, mix about 200 ml of Auto Glym Polar Blast per 1 L of water. For a foam cannon or an exact bucket amount, use the Find Your Detail dilution calculator on the product page: https://findyourdetail.io/products/auto-glym/polar-blast

Auto Glym 폴라 블래스트 — Exterior : Foam, pH neutral, 기본 희석 1:5. 1:5 기준 물 1L당 Auto Glym 폴라 블래스트 약 200ml. 폼캐논이나 정확한 버킷 용량은 제품 페이지의 Find Your Detail 희석 계산기에서 계산하세요: https://findyourdetail.io/products/auto-glym/polar-blast

A pH neutral snow foam pre-wash applied through a pressure washer and foam gun. It builds a thick clinging foam that softens dirt and traffic film before contact washing, helping reduce wash-induced scratches. It is the first stage of the Autoglym Polar three-step process and is safe on existing waxes and sealants.

고압세척기와 폼건으로 도포하는 pH 중성 사전세차용 스노우 폼입니다. 두껍게 점착되는 거품이 콘택트 세차 전 오염과 트래픽 필름을 풀어내 세차 스크래치 위험을 줄여 줍니다. 오토글림 폴라 3단계 공정의 첫 단계이며 기존 왁스·실런트에 영향을 주지 않습니다.

Brand
Auto Glym
Categories
Exterior : Foam, Exterior : Pre-washing (Pretreatment)
Primary dilution
1:5
pH
neutral (7)
Where to buy
Amazon (US) — As an Amazon Associate, Find Your Detail earns from qualifying purchases.
Last updated
2026-06-16

Key features

Dilution

UseDilutionRatio
Exterior : Foam (primary)1:51:5

Usage

  1. Check that bodywork and wheels are cool to the touch and out of direct sunlight.
  2. Mix Polar Blast in the foam bottle starting around 100ml product to 500ml water and adjust the foam gun to taste.
  3. Spray onto the vehicle from the bottom up, covering all exterior surfaces including glass and wheels.
  4. Let the foam dwell up to 10 minutes without letting it dry on the surface.
  5. Rinse thoroughly from the bottom up.

핵심 특징

  • Auto Express 제품 어워드 수상 2020 — 고압세척기 샴푸
  • 비접촉 스노우 폼 사전세차제
  • 두껍고 점착력 높은 거품
  • pH 중성, 왁스·실런트 안전
  • 트래픽 필름·중오염 분해
  • 무광·새틴 도장에도 사용 가능

사용법

  1. 차체와 휠이 만졌을 때 시원하고 직사광선이 없는 곳에서 작업합니다.
  2. 폼 보틀에 폴라 블래스트 100ml에 물 500ml 정도로 섞고 폼건 설정으로 거품 양을 조절합니다.
  3. 유리와 휠을 포함한 외부 전체에 아래에서 위로 분사합니다.
  4. 표면에서 마르지 않도록 최대 10분간 두어 작용시킵니다.
  5. 아래에서 위 방향으로 충분히 헹궈냅니다.

Also known as: 오토글림, 오토그림, Autoglym Polar Blast, PB, Autoglym PB, 오토글림 폴라 블래스트, 오토글림 PB, PB002.5

한국어로 보기

Sources

Related products

More from Auto Glym

More Foam products

Explore more