SC6 Wet Dressing
SC6 웻 드레싱
innova · 이노바 · 이노바카 · Innovacar SC6 Wet Dressing · IC SC6 Wet Dressing · SC6 · Innovacar SC6 · IC SC6 · 이노바카 SC6 웻 드레싱 · 이노바카 SC6 · 701904
SC6 Wet Dressing is a high-gloss water-repellent gel that restores deep colour and shine to tires, rubber seals, plastic parts, and exterior trim. Once cured it forms a hydrophobic, antistatic layer that helps resist rain and UV over many kilometres. Its fast drying time limits splashing if the vehicle is moved shortly after application.
SC6 웻 드레싱은 타이어, 고무 씰, 플라스틱 부품, 외장 트림에 깊은 색감과 광택을 되살리는 고광택 발수 젤입니다. 경화되면 발수·정전기 방지 막을 형성해 빗물과 자외선을 오래 견디는 데 도움을 줍니다. 빠른 건조로 시공 직후 차량을 옮겨도 튐 현상이 적습니다.
- Brand
- Innova Car
- Categories
- Exterior : Tire&Wheel Sealant, Interior : Trim Sealants
Key features
- High-gloss wet finish
- Hydrophobic, antistatic layer
- Self-cleaning and rain-resistant once cured
- Quick drying with minimal sling-off
- Multi-surface: tires, rubber seals, plastics, dashboard, engine bay
- Dries in about 20 minutes, cures after roughly 2 hours
Usage
- Prepare tires with a prewash (100% Degreasing or SP1 Prewash) and decontaminate with SD1 Iron.
- Remove traces of previous protectants by wiping with D2 Check on a dedicated microfiber cloth.
- Shake SC6 Wet Dressing, apply product onto a Micron App microfiber applicator, and spread evenly over the entire tire.
- For longer durability, allow to absorb and remove any excess after 15–30 minutes.
- For greater depth of color and shine, apply a second coat after 15–30 minutes.
- The product fully activates after 2 hours. Do not apply on the tire tread.
핵심 특징
- 고광택 웻 마감
- 발수·정전기 방지 막
- 경화 후 자가 세정과 빗물 저항
- 빠른 건조와 적은 튐 현상
- 타이어, 고무 씰, 플라스틱, 대시보드, 엔진룸 등 다용도
- 약 20분 건조, 약 2시간 경화
사용법
- 100% 디그리징 또는 SP1 프리워시로 타이어를 충분히 사전 세정하고, SD1 아이언으로 오염물을 제거합니다.
- 전용 마이크로파이버에 D2 체크를 묻혀 기존 보호제 잔여물을 닦아냅니다.
- SC6 웻 드레싱을 흔든 후 마이크론 앱 어플리케이터에 제품을 묻혀 타이어 전체에 고르게 도포합니다.
- 내구성을 높이려면 제품이 흡수되도록 두고 15~30분 후 잉여분을 닦아냅니다.
- 더 깊은 색감과 광택을 원한다면 15~30분 후 2차 도포합니다.
- 제품은 2시간 후 완전히 활성화됩니다. 타이어 트레드에는 도포하지 마십시오.