SC3 Glass Sealant
SC3 글라스 실란트
innova · 이노바 · 이노바카 · Innovacar SC3 Glass Sealant · IC SC3 Glass Sealant · SC3 · Innovacar SC3 · IC SC3 · 이노바카 SC3 글라스 실란트 · 이노바카 SC3 · 79296
SC3 Glass Sealant is a nanotechnology rain-repellent coating for windscreens and windows. It forms an oil- and water-repellent barrier that holds up against wiper fluids, alcohol, and repeated washes, and it helps water sheet off the glass to improve visibility while driving in the rain.
SC3 글라스 실란트는 앞유리와 창문에 바르는 나노기술 발수 코팅입니다. 와이퍼액, 알코올, 반복 세차에도 견디는 발유·발수 막을 형성하고, 빗속 주행 시 물이 흘러내리도록 도와 시야 확보에 도움을 줍니다.
- Brand
- Innova Car
- Categories
- Exterior : Glass Sealant
Key features
- Hydrophobic and oil-repellent on glass
- Water sheeting from around 50 km/h
- Tolerant to alcohol and wiper fluids
- Reduces wiper friction and protects glass
- Dries in about 20 minutes, cures after roughly 7 hours
- High beading and durability rating
Usage
- Clean and decontaminate the glass with DS Scale and a clay bar; use glass polish if decontamination is severe.
- If wax residue is present, remove it with D2 Check before treatment.
- Apply the product on dry glass using the included applicator and Micron Suede cloth in a crisscross pattern — vertically top to bottom, then horizontally right to left.
- Wait 1 minute and buff with a dry microfibre cloth to remove excess product.
- A second coat may be applied after 20 minutes to enhance the effect.
- Allow up to 7 hours for full activation. Rinse the sprayer and applicator with clean water before storage.
핵심 특징
- 유리 발수 및 발유
- 약 50km/h부터 물 흘림 효과
- 알코올과 워셔액에 강함
- 와이퍼 마찰을 줄이고 유리를 보호
- 약 20분 건조, 약 7시간 경화
- 높은 비딩과 지속력 평가
사용법
- DS 스케일과 클레이 바로 유리를 세정·오염 제거합니다. 심한 경우 유리 폴리싱을 사용합니다.
- 왁스 잔여물이 있으면 처리 전 D2 체크로 제거합니다.
- 건조한 유리에 동봉된 어플리케이터와 마이크론 스웨이드 천으로 교차 방식(수직→수평)으로 제품을 도포합니다.
- 1분 대기 후 건조한 마이크로파이버 천으로 잉여 제품을 닦아냅니다.
- 20분 후 효과 향상을 위해 2회 도포를 추가할 수 있습니다.
- 완전한 활성화까지 최대 7시간 대기합니다. 보관 전 스프레이와 어플리케이터를 깨끗한 물로 세척합니다.