SC3 글라스 실란트
SC3 Glass Sealant
innova · 이노바 · 이노바카 · Innovacar SC3 Glass Sealant · IC SC3 Glass Sealant · SC3 · Innovacar SC3 · IC SC3 · 이노바카 SC3 글라스 실란트 · 이노바카 SC3 · 79296
SC3 글라스 실란트는 앞유리와 창문에 바르는 나노기술 발수 코팅입니다. 와이퍼액, 알코올, 반복 세차에도 견디는 발유·발수 막을 형성하고, 빗속 주행 시 물이 흘러내리도록 도와 시야 확보에 도움을 줍니다.
- 브랜드
- Innova Car
- 카테고리
- Exterior : Glass Sealant
- 기본 희석 비율
- RTU
핵심 특징
- 유리 발수 및 발유
- 약 50km/h부터 물 흘림 효과
- 알코올과 워셔액에 강함
- 와이퍼 마찰을 줄이고 유리를 보호
- 약 20분 건조, 약 7시간 경화
- 높은 비딩과 지속력 평가
희석 비율
- Exterior : Glass Sealant — RTU (1:0) (기본)
사용법
- DS 스케일과 클레이 바로 유리를 세정·오염 제거합니다. 심한 경우 유리 폴리싱을 사용합니다.
- 왁스 잔여물이 있으면 처리 전 D2 체크로 제거합니다.
- 건조한 유리에 동봉된 어플리케이터와 마이크론 스웨이드 천으로 교차 방식(수직→수평)으로 제품을 도포합니다.
- 1분 대기 후 건조한 마이크로파이버 천으로 잉여 제품을 닦아냅니다.
- 20분 후 효과 향상을 위해 2회 도포를 추가할 수 있습니다.
- 완전한 활성화까지 최대 7시간 대기합니다. 보관 전 스프레이와 어플리케이터를 깨끗한 물로 세척합니다.
SC3 Glass Sealant is a nanotechnology rain-repellent coating for windscreens and windows. It forms an oil- and water-repellent barrier that holds up against wiper fluids, alcohol, and repeated washes, and it helps water sheet off the glass to improve visibility while driving in the rain.
Key features
- Hydrophobic and oil-repellent on glass
- Water sheeting from around 50 km/h
- Tolerant to alcohol and wiper fluids
- Reduces wiper friction and protects glass
- Dries in about 20 minutes, cures after roughly 7 hours
- High beading and durability rating
Usage
- Clean and decontaminate the glass with DS Scale and a clay bar; use glass polish if decontamination is severe.
- If wax residue is present, remove it with D2 Check before treatment.
- Apply the product on dry glass using the included applicator and Micron Suede cloth in a crisscross pattern — vertically top to bottom, then horizontally right to left.
- Wait 1 minute and buff with a dry microfibre cloth to remove excess product.
- A second coat may be applied after 20 minutes to enhance the effect.
- Allow up to 7 hours for full activation. Rinse the sprayer and applicator with clean water before storage.