MuMuu2

무무 2

MuMuu2 is a specialty glass coating agent using special silicone and fluorine compounds, designed for exceptional durability, water repellency, and mineral deposit prevention on window glass. It can be used as a standalone glass coating or layered over AVELL7.1 as a top coat to convert the glass surface to a hydrophobic film, while also reducing wiper chatter and maintaining clarity.

MuMuu2는 특수 실리콘과 불소 화합물을 사용한 특별 사양의 유리 코팅제로, 탁월한 내구성, 발수성, 물때 고착 억제를 위해 설계되었습니다. 단독 유리 코팅으로 사용하거나 AVELL7.1 위에 탑 코트로 도포하여 유리 면을 발수 피막으로 전환할 수 있으며, 와이퍼 울림도 경감합니다.

Brand
Ganbass
Categories
Exterior : Glass Sealant
Primary dilution
RTU

Key features

Dilution

Usage

  1. Prepare the glass surface using GBS-W or GBS-G, then dry the glass completely.
  2. For combination use with AVELL7.1: apply AVELL7.1 to a small cut cloth and spread over the glass; wipe off excess immediately, then without waiting, apply MuMuu2 over it.
  3. For standalone use: apply an appropriate amount of MuMuu2 to a cut cloth or cotton and spread over the glass, applying in two passes to ensure full coverage.
  4. After spreading, wait 2-4 minutes in summer or 4-6 minutes in winter, then wipe off the excess with a microfiber cloth.
  5. Allow to cure for at least 30 minutes in summer or 60 minutes in winter without exposure to water.

핵심 특징

  • 특수 실리콘 및 불소 화합물 배합
  • 장기 내구성 (Window-protection·STREAM의 2배 이상)
  • 강력한 물때 고착 억제
  • 단독 시공 또는 AVELL7.1 위 탑 코트로 사용 가능
  • AVELL7.1 시공 유리를 발수 피막으로 전환
  • 와이퍼 울림 경감
  • 높은 방오성과 오염 제거 용이성

사용법

  1. GBS-W 또는 GBS-G로 유리 면을 하지 처리한 후 완전히 건조시켜 주세요.
  2. AVELL7.1과 병용 시공 시: AVELL7.1을 작은 컷 클로스에 적셔 유리 면에 도포하고 즉시 여분을 닦아낸 후, 대기 없이 MuMuu2를 그 위에 도포해 주세요.
  3. 단독 시공 시: MuMuu2를 컷 클로스나 면에 적당량 적셔 유리 면 전체에 도포하고, 도포 누락 방지를 위해 2회 겹쳐 바르세요.
  4. 도포 후 여름은 2~4분, 겨울은 4~6분 정도 기다린 후 마이크로파이버 클로스로 여분을 닦아내 주세요.
  5. 시공 후 여름은 30분 이상, 겨울은 60분 이상 물에 닿지 않도록 건조시켜 주세요.

Also known as: 간바스, ganbas, Ganbass MuMuu2, 간바스 MuMuu2, 간바스 무무 2, MuMuu2窓ガラスコーティング剤, 간바스 무무2, 무무2

한국어로 보기

Sources