SC0 Hydro Sealant
SC0 하이드로 실란트
innova · 이노바 · 이노바카 · Innovacar SC0 Hydro Sealant · IC SC0 Hydro Sealant · SC0 · Innovacar SC0 · IC SC0 · 이노바카 SC0 하이드로 실란트 · 이노바카 SC0
SC0 Hydro Sealant is a water-based nanotechnology spray sealant for bodywork that uses siloxanes and fluoropolymers to form a chemical and molecular protective barrier. It gives a mirror effect with deep colour, strong water repellency, and a silk-smooth feel. Protection lasts several months on its own and longer when maintained with W1 Quick Detailer and H20 Coat.
SC0 하이드로 실란트는 실록산과 불소폴리머로 화학·분자 보호막을 형성하는 수성 나노기술 스프레이 실란트입니다. 미러 효과와 깊은 발색, 강한 발수성, 실크처럼 매끄러운 감촉을 줍니다. 단독으로 수개월, W1 퀵 디테일러와 H20 코트로 유지 관리하면 더 오래 보호가 지속됩니다.
- Brand
- Innova Car
- Categories
- Exterior : Coating
- pH
- neutral (7)
Key features
- Siloxane and fluoropolymer nanotechnology barrier
- Mirror effect with depth of colour
- Strong water-repellent and rainproof effect
- Silk-smooth surface finish
- Petroleum distillate-free, safe on painted surfaces at high temperatures
- Suits coated and uncoated vehicles, including classic cars
- Several months of protection, longer with maintenance
Usage
- Clean the car with SP1 Prewash and S2 Foamy, then remove contaminants with DS Scale, D3 Tar, D1 Iron, and D2 Check.
- Ensure the car surface is completely dry.
- Apply 2 to 3 sprays of SC0 Hydro Sealant onto a low-pile microfibre cloth.
- Work panel by panel in a crisscross pattern, applying horizontally then vertically.
- Buff with a medium or long-pile microfibre cloth in circular motions, turning it often to remove excess.
- Allow several hours for full activation. After 20 minutes apply W1 Quick Detailer to finish; maintain with H20 Coat every 3 washes.
핵심 특징
- 실록산·불소폴리머 나노기술 장벽
- 색상 깊이 있는 미러 효과
- 강한 발수·방우 효과
- 실크처럼 매끄러운 표면 마감
- 석유 유도체 미함유, 고온 도장면 직접 도포 안전
- 클래식 카 포함 코팅·무코팅 차량 모두 적합
- 수개월 보호, 유지 관리 시 더 오래 지속
사용법
- SP1 프리워시와 S2 포미로 세차한 뒤 DS 스케일, D3 타르, D1 아이언, D2 체크로 오염을 제거합니다.
- 차체 표면이 완전히 마른 상태인지 확인합니다.
- SC0 하이드로 실란트를 짧은 파일 마이크로파이버 천에 2~3회 분사합니다.
- 패널별로 교차 방식(수평 후 수직)으로 도포합니다.
- 중간 또는 긴 파일 마이크로파이버 천으로 원형 동작으로 버핑하며 면을 자주 바꿔 잉여 제품을 흡수합니다.
- 완전 활성화까지 수 시간 대기합니다. 도포 20분 후 W1 퀵 디테일러로 마무리하고, 세차 3회마다 H20 코트로 유지 관리합니다.