FC 2000 Fine Cut
FC 2000 파인 컷
인피니티 · 인피니티 왁스 · infinity · Zvizzer FC 2000 Fine Cut · FC 2000 · Zvizzer FC 2000 · FC2000 · 즈비저 FC 2000 파인 컷 · 즈비저 FC 2000
Zvizzer FC 2000 Fine Cut is an anti-hologram polish that uses intelligent, self-grinding alumina abrasive grains of the latest generation to guarantee a completely hologram-free paint finish. The formula is water-based and free of silicone and solvents, making it safe for all cured and fresh paints, including scratch-resistant clear coats.
즈비저 FC 2000 파인 컷은 최신 세대의 자기 연삭 알루미나 연마 입자를 사용하여 홀로그램을 완전히 제거하는 안티홀로그램 광택제입니다. 수성 기반으로 실리콘과 용매가 없어, 스크래치 저항성 클리어코트를 포함한 경화 도장과 신선한 도장 모두에 안전하게 사용할 수 있습니다.
- Brand
- Infinity Wax
- Categories
- Exterior : Polishes
- Primary dilution
- RTU
Key features
- Eliminates holograms from paint surfaces
- Self-grinding alumina abrasive technology
- 100% hologram-free finish
- Water-based, solvent-free and silicone-free
- Compatible with all paints including scratch-resistant coats
- Works on fresh and fully cured paint
Dilution
- Exterior : Polishes — RTU (1:0) (primary)
Usage
- Apply a sufficient amount of FC 2000 to a yellow polishing pad or directly onto the paint surface.
- Spread the product at low speed (approximately 1000 rpm) across the defect area.
- Increase speed to approximately 1600 rpm and work with moderate pressure until the defect is resolved.
- Always use a clean polishing pad to avoid unnecessary surface damage.
핵심 특징
- 도장 면의 홀로그램 완전 제거
- 자기 연삭 알루미나 연마 기술
- 100% 홀로그램 없는 마감
- 수성 기반, 용매 및 실리콘 없음
- 스크래치 저항성 코트 포함 모든 도장과 호환
- 신도장 및 완전 경화 도장 모두 적용 가능
사용법
- FC 2000을 황색 폴리싱 패드 또는 도장 표면에 충분히 도포합니다.
- 낮은 속도(약 1000rpm)로 결함 부위에 제품을 고르게 펴 바릅니다.
- 속도를 약 1600rpm으로 높이고 적당한 압력으로 결함이 해소될 때까지 작업합니다.
- 불필요한 표면 손상을 방지하기 위해 항상 깨끗한 폴리싱 패드를 사용합니다.