Synergy Ceramic Wax
시너지 세라믹 왁스
인피니티 · 인피니티 왁스 · infinity · Infinity Wax Synergy Ceramic Wax · IW Synergy Ceramic Wax · SCW · 인피니티 왁스 시너지 세라믹 왁스 · 인피니티 왁스 SCW · IFW123
A highly durable synthetic ceramic wax combining polysilazane ceramic resins with modified polyethylene, a fluorine-derived PTFE-related polymer, and two solid SiO2 polymers for exceptional water-contact angles and long-lasting protection. Tested at over 58 weeks of durability with water contact angles of up to 124°, it resists detergents and temperature extremes.
폴리실라잔 세라믹 수지에 변성 폴리에틸렌, 불소 유래 PTFE 관련 폴리머, 2종의 고체 SiO2 폴리머를 결합한 고내구성 합성 세라믹 왁스입니다. 58주 이상의 내구성 테스트에서 최대 124°의 물 접촉각을 기록했으며, 세제와 온도 변화에 강한 내성을 보입니다.
- Brand
- Infinity Wax
- Categories
- Exterior : Coating
- Primary dilution
- RTU
Key features
- Ceramic resins and binders combined with PTFE-related fluorine polymer
- Water contact angles tested up to 124° at 12 hours post-application
- 58+ weeks durability in testing
- High resistance to detergents
- Unaffected by temperature extremes — ideal winter protection
- 50ml covers 5–7 vehicles; 200ml covers approximately 25
Dilution
- Exterior : Coating — RTU (1:0) (primary)
Usage
- Strip previous waxes and sealants with a light machine polish followed by a thorough IPA-based panel wipe.
- Take 1–2 swipes of wax onto a soft foam applicator and press across a small panel area to build an even, thin layer.
- Remove after 1–5 minutes maximum with a short-pile cloth, then buff any haze with a plush towel using straight-line passes.
- Allow 3 hours before wetting the surface and avoid washing for 7 days after application.
핵심 특징
- PTFE 관련 불소 폴리머와 결합된 세라믹 수지
- 도포 후 12시간 기준 최대 124°의 물 접촉각 테스트 완료
- 테스트 기준 58주 이상 내구성
- 세제에 대한 높은 내성
- 온도 변화에 무관 — 겨울철 보호에 이상적
- 50ml로 5~7대, 200ml로 약 25대 시공 가능
사용법
- 가벼운 기계 광택 후 IPA 기반 패널 와이프로 기존 왁스와 실란트를 완전히 제거합니다.
- 부드러운 폼 어플리케이터에 왁스를 1~2번 떠서 작은 패널 면적에 고르고 얇게 도포합니다.
- 최대 1~5분 후 단모 타올로 제거하고, 잔여 헤이즈는 플러시 타올로 직선 방향으로 닦아냅니다.
- 도포 후 3시간 이내 물에 닿지 않도록 하고, 7일간 세차를 삼가합니다.