Infinity Wax Powerfoam Snowfoam Dilution Ratios & User Guide

Infinity Wax Powerfoam Snowfoam dilution ratio and pH specification chart

파워폼 스노우폼

Infinity Wax Powerfoam Snowfoam — Exterior : Foam, alkali pH, base dilution 1:10~1:100. At 1:10, mix about 100 ml of Infinity Wax Powerfoam Snowfoam per 1 L of water. For a foam cannon or an exact bucket amount, use the Find Your Detail dilution calculator on the product page: https://findyourdetail.io/products/infinity-wax/powerfoam-snowfoam

Infinity Wax 파워폼 스노우폼 — Exterior : Foam, pH alkali, 기본 희석 1:10~1:100. 1:10 기준 물 1L당 Infinity Wax 파워폼 스노우폼 약 100ml. 폼캐논이나 정확한 버킷 용량은 제품 페이지의 Find Your Detail 희석 계산기에서 계산하세요: https://findyourdetail.io/products/infinity-wax/powerfoam-snowfoam

A highly concentrated alkaline snowfoam formulated with sugar-derived detergents for powerful traffic film removal without being corrosive to sensitive surfaces. Compatible with domestic low-pressure washers, it delivers up to 100:1 dilution and removes up to 90% of visible dirt as a pre-wash step.

민감한 표면에 부식을 일으키지 않으면서도 강력한 오염 제거 성능을 발휘하는 고농축 알칼리 스노우폼입니다. 설탕 기반 세제로 제조되어 환경에도 안전하며, 최대 100:1 희석이 가능하고 접촉 세차 전 가시 오염의 최대 90%를 제거합니다.

Brand
Infinity Wax
Categories
Exterior : Foam, Exterior : Pre-washing (Pretreatment)
Primary dilution
1:10~1:100
pH
alkali
Where to buy
Amazon (US) — As an Amazon Associate, Find Your Detail earns from qualifying purchases.
Last updated
2026-06-08

Key features

Dilution

UseDilutionRatio
Exterior : Foam (primary)1:10~1:1001:10-100

Usage

  1. Dilute according to soiling level: 1:10 for heavy contamination, 1:25 for general road film, or up to 1:100 for light use.
  2. Load the diluted solution into a dedicated foam lance and apply to the vehicle.
  3. Allow the foam to dwell for 3–5 minutes — do not let it dry on the surface.
  4. Rinse thoroughly with a pressure washer before proceeding to contact wash.

핵심 특징

  • 최대 100:1 희석 가능한 고농축
  • 도장, 트림, 환경에 안전한 설탕 기반 세제
  • 접촉 세차 전 가시 오염의 최대 90% 제거
  • 가정용 저압 고압 세척기에서도 효과적
  • 3시간 이내 생분해되는 잔류물
  • 세라믹 코팅, 왁스, 실란트에 안전

사용법

  1. 오염 정도에 따라 희석하세요: 심한 오염은 1:10, 일반 도로 오염은 1:25, 가벼운 사용은 최대 1:100.
  2. 희석액을 전용 폼 랜스에 채워 차량에 도포합니다.
  3. 폼을 3~5분간 방치하되, 표면에서 건조되지 않도록 주의합니다.
  4. 접촉 세차 전 고압 세척기로 충분히 헹굽니다.

Also known as: 인피니티, 인피니티 왁스, infinity, Infinity Wax Powerfoam Snowfoam, IW Powerfoam Snowfoam, Powerfoam, IW Powerfoam, 인피니티 왁스 파워폼, IFW044

한국어로 보기

Sources

Related products

More from Infinity Wax

More Foam products

Explore more