Gelcoat Marine Premium One-Step Polish
겔코트 마린 프리미엄 원스텝 폴리시
인피니티 · 인피니티 왁스 · infinity · Menzerna Gelcoat Marine Premium One-Step Polish · Gelcoat Premium One-Step Polish · Menzerna Gelcoat Premium One-Step Polish · 멘저나 겔코트 마린 프리미엄 원스텝 폴리시 · 멘저나 겔코트 프리미엄 원스텝 폴리시
Menzerna Gelcoat Marine Premium One-Step Polish is a marine-grade compound developed specifically for boat and vessel gelcoat surfaces, capable of removing scratches and signs of wear while simultaneously delivering a high-gloss finish in a single pass. Its cut rating of 8/10 and gloss rating of 8/10 make it an efficient time-saver for large vessels where multi-step polishing is impractical. It is applied with a rotary polisher using a heavy cut foam or lambswool pad.
멘저나 겔코트 마린 프리미엄 원스텝 폴리시는 보트 및 선박 겔코트 표면을 위해 특별히 개발된 마린 등급 컴파운드로, 흠집과 마모 흔적을 제거하면서 동시에 광택을 한 번의 작업으로 완성합니다. 절삭력 8/10, 광택 8/10의 성능으로 다단계 연마가 비효율적인 대형 선박에서 작업 시간을 크게 단축해 줍니다. 회전식 폴리셔에 헤비컷 폼 패드나 람스울 패드를 사용해 도포합니다.
- Brand
- Infinity Wax
- Categories
- Exterior : Polishes
- Primary dilution
- RTU
Key features
- Removes scratches and wear marks on gelcoat in one step
- Polishes and creates high gloss simultaneously
- Cut: 8/10, Gloss: 8/10
- Specialized for marine and boat gelcoat
- Compatible with rotary polishing machines
- Use with heavy cut foam or lambswool pads
Dilution
- Exterior : Polishes — RTU (1:0) (primary)
Usage
- Clean the gelcoat surface thoroughly before polishing.
- Shake the bottle and apply the polish onto the polishing pad.
- Select a heavy cut foam pad for surfaces with significant signs of use.
- Work in a cross-pattern with a rotary polisher, starting at low speed with firm pressure.
- In the final passes, increase machine speed and reduce pressure.
- Continue until only a slightly transparent or oily film remains, then remove residue with a premium microfibre cloth.
- For additional gloss, repeat the process or follow up with Gelcoat Premium Gloss using a soft cut foam pad.
핵심 특징
- 겔코트의 흠집 및 마모 흔적을 한 번에 제거
- 연마와 광택을 동시 달성
- 절삭력 8/10, 광택 8/10
- 마린 및 보트 겔코트 전용
- 회전식 폴리셔 호환
- 헤비컷 폼 패드 또는 람스울 패드 사용
사용법
- 연마 전 겔코트 표면을 깨끗이 세척합니다.
- 제품을 흔든 후 폴리싱 패드에 적당량을 도포합니다.
- 심한 마모가 있는 표면에는 헤비컷 폼 패드를 선택합니다.
- 회전식 폴리셔로 낮은 속도와 강한 압력으로 십자 패턴으로 작업합니다.
- 마무리 단계에서는 기계 속도를 높이고 압력을 줄입니다.
- 약간 투명하거나 기름기 있는 막만 남을 때까지 작업한 후 프리미엄 극세사 천으로 잔여물을 제거합니다.
- 더 높은 광택을 원하면 소프트컷 폼 패드로 작업을 반복하거나 겔코트 프리미엄 글로스를 후속 적용합니다.