Infinity Wax SuperGloss+ Dilution Ratios & User Guide

Infinity Wax SuperGloss+ dilution ratio and pH specification chart

슈퍼글로스 플러스

Infinity Wax SuperGloss+ — Exterior : Coating. See full specs and usage on the Find Your Detail product page: https://findyourdetail.io/products/infinity-wax/supergloss-plus

Infinity Wax 슈퍼글로스 플러스 — Exterior : Coating. 전체 사양·사용법은 Find Your Detail 제품 페이지에서 확인하세요: https://findyourdetail.io/products/infinity-wax/supergloss-plus

SuperGloss+ Liquid Wax is a fast-applying cream wax combining solid and liquid SiO2 polymers with premium Brazilian carnauba wax to deliver deep wet-look gloss and strong hydrophobic protection lasting four to six months. It cures quickly, wipes off effortlessly without powdery haze or streaking, and a single 500ml bottle covers over 25 vehicles. It is applied as the final step in the detailing process, by hand or machine.

슈퍼글로스+ 리퀴드 왁스는 고체 및 액체 SiO2 폴리머와 브라질산 카나우바 왁스를 결합한 크림 형태의 왁스로, 4~6개월 지속되는 깊은 웻룩 광택과 강력한 발수 보호를 제공합니다. 빠르게 경화되며 분말 잔여물이나 얼룩 없이 쉽게 제거되고, 500ml 1병으로 25대 이상 차량에 적용 가능합니다.

Brand
Infinity Wax
Categories
Exterior : Coating
Primary dilution
RTU
Where to buy
Amazon (US) — As an Amazon Associate, Find Your Detail earns from qualifying purchases.
Last updated
2026-06-19

Key features

Dilution

UseDilutionRatio
Exterior : Coating (primary)RTU1:0

Usage

  1. Apply only to a clean and dry vehicle.
  2. Place 4 to 5 pea-sized drops onto a microfibre applicator pad and work the product over the panel in overlapping circular motions, treating 1 to 2 panels at a time.
  3. Allow approximately 1 minute, then gently wipe away the wax residue with a microfibre towel.
  4. Go over the entire vehicle again with a soft dry microfibre to remove all remaining excess.
  5. Alternatively, apply by machine on a slow speed setting using a soft finishing pad.

핵심 특징

  • 카르나우바 왁스와 SiO2 폴리머 결합으로 깊은 광택
  • 강력한 발수성을 갖춘 웻룩 광택
  • 빠른 경화 및 분말 잔여물 없는 간편한 제거
  • 4~6개월 보호 내구성
  • 500ml 1병으로 25대 이상 적용 가능
  • 수작업 및 기계 적용 모두 가능

사용법

  1. 깨끗하고 건조한 차량에만 적용하세요.
  2. 마이크로파이버 어플리케이터 패드에 완두콩 크기 4~5방울을 덜어 원형으로 겹쳐가며 바르되, 한 번에 1~2개 패널씩 작업하세요.
  3. 약 1분 후 마이크로파이버 타월로 왁스 잔여물을 부드럽게 닦아내세요.
  4. 부드러운 마른 마이크로파이버로 차량 전체를 다시 한번 닦아 남은 잔여물을 완전히 제거하세요.
  5. 또는 느린 속도 설정과 부드러운 마감 패드를 사용하여 기계로 적용할 수 있습니다.

Also known as: 인피니티, 인피니티 왁스, infinity, Infinity Wax SuperGloss+, IW SuperGloss+, SuperGloss Plus, 인피니티 왁스 슈퍼글로스 플러스, IFW136

한국어로 보기

Sources

Related products

More from Infinity Wax

More Coating products

Explore more