/ZERO: Citrus
/ZERO: 시트러스
Citrus is a highly concentrated pre-wash and all-purpose cleaner combining d-limonene with non-caustic, biodegradable sugar-based surfactants for strong degreasing and cleaning on all exterior vehicle surfaces. Safe on paint, matte finishes, wheels, metals, glass, plastics and rubbers, it can also be used as a heavy-duty APC for interior plastics, textiles and engine bays. Dilutable to around 1:100 and safe on ceramic coatings; safe on sealants and waxes when diluted above about 1:50.
시트러스는 디리모넨과 비부식성 생분해 슈가 계면활성제를 초고농축한 프리워시 겸 다목적 클리너입니다. 모든 차량 외부 표면에서 강력한 탈지·세정력을 발휘하며, 도장·매트 도장·휠·금속·유리·플라스틱·고무에 안전합니다. 인테리어 플라스틱·패브릭·엔진룸의 강력 세정에도 사용할 수 있으며, 약 1:100까지 희석 가능합니다.
- Brand
- Garage Therapy
- Categories
- Exterior : Pre-washing (Pretreatment), Interior : Trim Cleaner
- Primary dilution
- 1:50~1:100
- pH
- alkali
Key features
- Citrus pre-wash and all-purpose cleaner
- Suitable for both exterior and interior use
- Highly concentrated, dilutable to around 1:100
- Targets mould spores
- Compatible with trigger/pump and foam sprayers
- Foam lance compatible
- Ceramic coating safe
- Safe on sealants and wax above about 1:50 dilution
Dilution
- Exterior : Pre-washing (Pretreatment) — 1:50~1:100 (1:50-100) (primary)
- Interior : Trim Cleaner — 1:4~1:10 (1:4-10)
Usage
- Shake well before use. Adjust dilution based on contamination level.
- For light dirt or maintenance pre-wash, dilute up to 1:100.
- For moderate grime as APC, dilute around 1:50.
- For heavy buildup, dilute 1:4 to 1:10.
- Apply via foam lance, trigger sprayer, or pump sprayer evenly. Allow brief dwell time without letting product dry on surface.
- Agitate as needed and rinse thoroughly. Safe for waxes and sealants above 1:50 dilution.
핵심 특징
- 시트러스 기반 프리워시 겸 다목적 클리너
- 외장 및 실내 모두 사용 가능
- 약 1:100까지 희석 가능한 고농축 제품
- 곰팡이 포자 제거 효과
- 트리거·펌프·폼 스프레이어 호환
- 폼 랜스 호환
- 세라믹 코팅 안전
- 약 1:50 이상 희석 시 실란트·왁스에 안전
사용법
- 사용 전 잘 흔들어 줍니다. 오염 정도에 따라 희석 비율을 조정합니다.
- 가벼운 오염 또는 유지 관리용 프리워시는 최대 1:100으로 희석합니다.
- 중간 정도의 오염에 APC로 사용 시 약 1:50으로 희석합니다.
- 심한 오염에는 1:4~1:10으로 희석합니다.
- 폼 랜스, 트리거 스프레이어 또는 펌프 스프레이어로 균일하게 도포합니다. 표면에 마르지 않도록 짧은 드웰 타임을 둡니다.
- 필요에 따라 어지테이션 후 충분히 헹굽니다. 1:50 이상 희석 시 왁스 및 실란트에도 안전합니다.