Sno X
스뇌 엑스
stjarnagloss · Snö X · Stjärnagloss Snö X · 셰르나글로스 스뇌 엑스
Snö X is a hyper-concentrated intensive snow foam pre-wash that pairs the thick cling of a classic snow foam with the deep-cleaning strength of a traffic-film pre-wash. Sprayed through a snow foam cannon, it clings to vertical panels with long dwell time to lift dirt before contact washing. It is strongly alkaline rather than pH-neutral, so it cleans harder than regular Snö and must never be left to dry on the paint.
스뇌 엑스는 일반 스노우 폼의 두꺼운 점착력과 노면 오염을 제거하는 전처리제의 강력한 세정력을 결합한 초고농축 전처리 스노우 폼입니다. 스노우 폼 캐논으로 분사하면 수직 패널에 오래 머무르며 접촉 세차 전에 오염물을 들어 올립니다. pH 중성이 아닌 강알칼리성이라 일반 스뇌보다 세정력이 강하므로 도장면에서 마르도록 두어서는 안 됩니다.
- Brand
- Stjärnagloss
- Categories
- Exterior : Pre-washing (Pretreatment), Exterior : Foam
- Primary dilution
- 1:10~1:20
- pH
- alkali (13)
Key features
- Hyper-concentrated pre-wash snow foam
- Thick foam clings with long dwell time
- Strong cleaning for heavy soiling and winter film
- Strongly alkaline, not pH-neutral
- Optimised for 130bar+ foam cannon use
Dilution
- Exterior : Foam — 1:10~1:20 (1:10-20) (primary)
Usage
- Add 50 to 100ml of concentrate to a 1 litre foam cannon flask and top up with water, using the stronger mix on heavily soiled vehicles.
- Apply through a professional snow foam cannon driven by a pressure washer of 130bar or more.
- Spray from the bottom upwards so the foam dwells longest on the dirtiest lower panels.
- Let the foam dwell for a few minutes, but do not allow it to dry; avoid direct sunlight.
- Rinse all surfaces thoroughly before the foam dries.
핵심 특징
- 초고농축 전처리 스노우 폼
- 오래 머무르며 점착되는 두꺼운 거품
- 심한 오염과 겨울철 노면 오염에 강한 세정력
- pH 중성이 아닌 강알칼리성
- 130bar 이상 폼 캐논 사용에 최적화
사용법
- 1L 폼 캐논 보틀에 농축액 50~100ml를 넣고 물로 채우며, 오염이 심한 차량에는 더 진한 비율을 사용합니다.
- 130bar 이상의 고압 세척기에 연결한 전문가용 스노우 폼 캐논으로 분사합니다.
- 가장 오염이 심한 하단 패널에 거품이 오래 머물도록 아래에서 위로 분사합니다.
- 거품을 몇 분간 머무르게 하되 마르지 않게 하고, 직사광선은 피합니다.
- 거품이 마르기 전에 모든 표면을 충분히 헹굽니다.