Yum Citrus
얌 시트러스
Yum Citrus is a highly concentrated citrus pre-wash built around a bespoke formula that packs in a raw citrus content far higher than mainstream alternatives, blended with water-based degreasers for the remaining share. It is engineered to loosen and remove dirt, grease, grime and insect deposits before the main wash stage, and proves equally effective for engine bay touch-ups, door jamb cleaning and agitating panel gaps. Safe across clear coat, rubber, door jambs and engine bays, and can be diluted over a wide range depending on how heavily soiled the vehicle is.
얌 시트러스는 일반 시트러스 클리너보다 훨씬 높은 원료 함량을 자랑하는 맞춤 포뮬러 기반의 고농축 시트러스 프리워시로, 나머지는 수성 탈지제로 구성됩니다. 본세차 전 오염, 기름기, 때, 벌레 자국을 풀어내도록 설계되었으며, 엔진룸 터치업, 도어잼 세척, 패널 갭 예비 세척에도 안정적인 효과를 발휘합니다. 클리어코트, 고무, 도어잼, 엔진룸 등 다양한 부위에 사용할 수 있습니다.
- Brand
- Yum Cars
- Categories
- Exterior : Pre-washing (Pretreatment)
- Primary dilution
- 1:1~1:20
Key features
- Exceptionally high raw citrus content vs mainstream cleaners
- Effective pre-wash for dirt, grease, grime and bugs
- Safe on clear coat, rubbers, door jambs and engine bays
- Wide dilution range for light to heavy cleaning tasks
- Boosts engine bay touch-ups and panel gap prep
- Water-based degreaser blend
Dilution
- Exterior : Pre-washing (Pretreatment) — 1:1~1:20 (1:1-20) (primary)
Usage
- For heavy contamination, apply neat or dilute 1:1 with water before use.
- For regular maintenance washes, dilute between 1:5 and 1:10; on very well-kept vehicles try up to 1:20.
- Spray generously over the whole car, then follow with a thick foam layer from Yum Foam and allow both products to dwell.
- Do not use on wrapped vehicles.
- Avoid applying in direct strong sunlight or allowing the product to dry onto the surface in high temperatures.
핵심 특징
- 일반 클리너 대비 압도적으로 높은 원료 함량
- 오염, 기름기, 때, 벌레 자국 효과적인 프리워시
- 클리어코트, 고무, 도어잼, 엔진룸에 안전
- 가벼운 세척부터 강력 세척까지 폭넓은 희석 범위
- 엔진룸 터치업 및 패널 갭 전처리에 효과적
- 수성 탈지제 블렌드
사용법
- 오염이 심한 경우 원액 그대로 또는 물과 1:1로 희석하여 사용합니다.
- 일반 관리 세차에는 1:5~1:10으로, 관리 상태가 좋은 차량에는 최대 1:20까지 희석합니다.
- 차량 전체에 충분히 분사한 뒤 얌 폼을 두껍게 도포하고 두 제품이 작용하도록 시간을 둡니다.
- 랩핑된 차량에는 사용하지 않습니다.
- 강한 직사광선 아래 또는 고온에서 제품이 표면에 마르지 않도록 주의합니다.