Tire-Protection /0

타이어 프로텍션 /0

A water-based tire wax by GANBASS designed as a sacrificial coating that absorbs daily road damage before the tire surface does. Applied neat and usable as a standalone treatment or as a primer base coat under oil-based tire dressings, it delivers a gentle, non-excessive gloss and is formulated for low aggression on NR/SBR rubber.

간바스의 수성 타이어 왁스로, 일상 주행 중 발생하는 미세한 손상과 오염을 먼저 흡수하는 희생 피막 개념을 기반으로 합니다. 원액 그대로 사용하며, 단독 시공뿐 아니라 유성 타이어 왁스의 프라이머 베이스로도 활용 가능합니다. NR/SBR 고무에 대한 저자극 설계입니다.

Brand
Ganbass
Categories
Exterior : Tire&Wheel Sealant
Primary dilution
RTU

Key features

Dilution

Usage

  1. Clean the tire surface thoroughly with a car wash to remove dirt and debris.
  2. Apply the product directly from a tire applicator sponge or cloth onto the tire sidewall.
  3. Adjust gloss level by applying additional coats as desired; note that initial saturation may require multiple applications for full effect.
  4. Allow to dry until road-ready — typically 30 seconds to 1 minute under normal conditions. Wipe away any excess or runs with a cloth.
  5. Do not apply to the tread surface; if accidental contact occurs, drive cautiously for approximately 10km on dry roads to wear it off.

핵심 특징

  • NR/SBR 고무에 저자극적인 수성 포뮬라
  • 도로 오염을 타이어 표면 대신 흡수하는 희생 피막 개념
  • 단독 시공 또는 유성 왁스 하도제로 이중 활용 가능
  • 중첩 도포로 조절 가능한 절제된 광택
  • 빠른 건조 (30초~1분 내 주행 가능)
  • 경화 후 논슬링 드라이터치 마감
  • 간바스 타이어 클리너 시리즈와 연동한 유지 관리 주기

사용법

  1. 타이어 표면을 세차로 깨끗이 닦아 먼지와 이물질을 제거하세요.
  2. 타이어 도포용 스펀지나 클로스에 적량을 취해 타이어 사이드월에 도포하세요.
  3. 원하는 광택 수준에 따라 중첩 도포하세요. 초기 시공 시 성분 포화를 위해 여러 번 도포가 필요할 수 있습니다.
  4. 30초~1분 정도 건조 후 주행 가능합니다. 잉여분이나 흘러내린 부분은 클로스로 닦아내세요.
  5. 트레드면에는 도포하지 마세요. 실수로 묻었을 경우 건조 노면에서 약 10km 주행하여 제거하세요.

Also known as: 간바스, ganbas, Ganbass Tire-Protection /0, Tire Protection Zero, 간바스 타이어 프로텍션 /0

한국어로 보기

Sources