AVELL 7.1
아벨 7.1
AVELL 7.1 is a hard-cure coating agent specialized for reducing soil adhesion, focusing on the type of anti-contamination performance that allows dirt to be washed away easily with shampoo or cleaners. It is designed to be used as an intermediate layer over other AVELL or BETA hardcoats and must always be finished with an over-coating agent such as FINALFILLER or HAZE. It also provides mineral deposit prevention when applied to glass surfaces.
AVELL 7.1은 세차 또는 클리너로 쉽게 제거할 수 있도록 오염 고착을 경감시키는 방오 특화 경화계 코팅제입니다. 다른 AVELL 시리즈나 BETA 하드 코트 위에 중간 코트로 사용하도록 설계되었으며, 반드시 FINALFILLER 또는 HAZE 등의 오버 코팅제로 마무리해야 합니다. 유리 면에 시공하면 물때 고착 경감 효과도 얻을 수 있습니다.
- Brand
- Ganbass
- Categories
- Exterior : Coating
- Primary dilution
- RTU
Key features
- Hard-cure coating specialized for soil adhesion reduction
- Focuses on contaminant release performance (easy washability)
- Designed to be layered over AVELL series or BETA coatings
- Must be top-coated with FINALFILLER or HAZE
- Also applicable to glass surfaces to reduce mineral deposit bonding
- Fast drying; apply over-coating without waiting
Dilution
- Exterior : Coating — RTU (1:0) (primary)
Usage
- After washing, perform base preparation with REBOOT series, ORIGIN Degreasing Shampoo, or PM-LIGHT according to the paint condition.
- Confirm there is no moisture on the paint surface, then apply the product to a cut cloth or coating applicator sponge and spread over approximately 40 cm square sections.
- Immediately wipe off excess with a separate microfiber cloth without letting it sit; dry quickly, so act fast.
- Without waiting, immediately apply the required over-coating agent (FINALFILLER or HAZE) to complete the coating.
핵심 특징
- 오염 고착 경감에 특화된 경화계 코팅
- 세차·클리너로 쉽게 제거 가능한 오염 방출 성능
- AVELL 시리즈 또는 BETA 코팅 위에 레이어로 사용 설계
- 반드시 FINALFILLER 또는 HAZE로 탑 코트 필요
- 유리 면에 시공하여 물때 고착 경감 가능
- 건조 빠름; 오버 코팅제를 대기 없이 바로 시공
사용법
- 세차 후 도장 상태에 맞게 REBOOT 시리즈, ORIGIN 탈지 샴푸, PM-LIGHT 등으로 하지 처리를 해 주세요.
- 도장 면에 수분이 없음을 확인한 후, 컷 클로스나 코팅 도포 스펀지에 제품을 적셔 40cm 사방 정도씩 도포해 주세요.
- 도포 후 즉시 별도의 마이크로파이버 클로스로 여분을 닦아내 주세요; 건조가 빠르므로 신속히 작업해 주세요.
- 대기 없이 즉시 필수 오버 코팅제(FINALFILLER 또는 HAZE)를 시공하여 마무리해 주세요.
Also known as: 간바스, ganbas, Ganbass AVELL 7.1, AVELLバージョン7.1, 간바스 AVELL 7.1, 간바스 아벨 7.1