QURERATZ
쿠레라츠
QURERATZ is a two-part, two-layer hardening coating system used in Ganbass professional shop work. Liquid A forms the primary base film lasting 12–24 months, while Liquid B is applied 30–60 minutes later as a second layer (6–12 months), together delivering deep gloss, enhanced contamination resistance, and compatibility with various maintenance products.
QURERATZ는 간바스 현장에서 사용하는 2액 2층 경화계 코팅 시스템입니다. A액이 12~24개월 지속되는 기본 피막을 형성하고, 30~60분 후 도포하는 B액이 6~12개월 유지되는 2층 피막을 형성하여 깊은 광택과 오염 제거 용이성을 제공합니다.
- Brand
- Ganbass
- Categories
- Exterior : Coating
- Primary dilution
- RTU
Key features
- Two-part, two-layer hardening coating system
- Liquid A base film: 12–24 months durability
- Liquid B top film: 6–12 months durability
- Deep gloss finish
- Enhanced contamination removal — suitable for gravel parking environments
- Strong compatibility with maintenance products
- To be finished with FINALFILLER over-coat as third layer
Dilution
- Exterior : Coating — RTU (1:0) (primary)
Usage
- After washing, perform surface pre-treatment with the appropriate maintenance product.
- Confirm the paint is completely dry, then apply Liquid A to a cut cloth or coating applicator sponge and work it into the paint surface. Without delay, wipe off any excess with a thin microfiber cloth.
- Wait 30–60 minutes, then apply Liquid B in the same manner — spread it onto the surface and immediately wipe off the excess with a thin microfiber cloth.
- After wiping off Liquid B, apply FINALFILLER over-coat as the third layer: spread it evenly with a round cloth or thin microfiber cloth and buff to a streak-free finish.
- Avoid getting the surface wet or touching it for at least 30 minutes after completing the application.
핵심 특징
- 2액 2층 경화계 코팅 시스템
- A액 베이스 피막: 12~24개월 내구성
- B액 상층 피막: 6~12개월 내구성
- 깊은 광택 표현
- 오염 제거 용이 — 자갈 주차장 등 열악한 보관 환경에 적합
- 각종 유지 보수 제품과 높은 호환성
- 3층 피막으로 FINALFILLER 오버코팅으로 마무리
사용법
- 세차 후 적절한 유지 보수 제품으로 하지 처리를 진행합니다.
- 도장면에 수분이 완전히 없는 것을 확인하고, 카트 클로스 또는 코팅 도포 스폰지에 A액을 적셔 도장면에 바릅니다. 지체 없이 얇은 마이크로파이버 클로스로 잔여분을 닦아냅니다.
- 30~60분 후 B액도 동일하게 카트 클로스나 스폰지에 적셔 도장면에 바르고, 즉시 얇은 마이크로파이버 클로스로 잔여분을 닦아냅니다.
- B액을 닦아낸 후 3층 피막으로 FINALFILLER 오버코팅을 시공합니다. 둥근 클로스나 얇은 마이크로파이버 클로스에 적셔 고르게 바르고 얼룩 없이 닦아 마무리합니다.
- 시공 완료 후 최소 30분간은 도장면에 물을 뿌리거나 접촉하지 않도록 합니다.
Also known as: 간바스, ganbas, Ganbass QURERATZ, 간바스 쿠레라츠