Quin

Quin (Type-c) is a hardened paint coating agent developed with a singular focus on forming a dense, gap-free protective film over the paint surface — conceptually like fitting a high-performance waterproof membrane to the car body. Rather than prioritizing gloss or water-beading, it maximises film integrity through chemical bonding strength, which incidentally also results in strong beading. Intended for light and mid-tone paint colors (white, silver, red, blue, gunmetal, etc.) and also applicable to uncoated metal surfaces; not suitable for black paint.

Quin(Type-c)은 도장면에 틈 없는 치밀한 보호 피막을 형성하는 것에 집중하여 개발된 하드닝 코팅제입니다. 광택이나 발수보다 화학적 결합력을 통한 피막의 완전성을 최우선으로 추구하며, 결과적으로 강한 발수 효과도 부수적으로 발생합니다. 화이트, 실버, 레드, 블루, 건메탈 등 밝은 계열 및 중간 색상의 도장에 설계되었으며, 도장되지 않은 금속면에도 적용 가능하나 블랙 도장에는 사용 불가합니다.

Brand
Ganbass
Categories
Exterior : Coating

Key features

Usage

  1. Complete surface preparation: wash with ORIGIN Degreasing Shampoo, then carry out paint correction using the REBOOT series (or Deposrin / REBOOT-GEL for lighter soiling).
  2. Remove all water droplets from the car body using a blower or similar tool.
  3. Apply the product to a coating applicator sponge or palm-sized cloth and spread it evenly over the paint surface.
  4. Without delay after spreading, buff off all excess product with a separate dry cloth.

핵심 특징

  • 최대 보호를 위한 치밀하고 틈 없는 피막 형성
  • 잔류 성분 의존이 아닌 강한 화학적 결합력
  • 치밀한 피막의 결과로 강한 발수 효과 발생
  • 초보자도 시공 가능한 낮은 난이도
  • 블랙 이외의 도장면 및 금속 표면에 적용 가능
  • 단독 시공을 전제로 한 단층 코팅 설계

사용법

  1. ORIGIN 탈지 샴푸로 세차 후, REBOOT 시리즈로 하지 처리를 진행합니다(가벼운 오염이라면 데포린 또는 REBOOT-GEL 사용 후 REBOOT 적용).
  2. 블로어 등을 이용해 차체의 물방울을 완전히 제거합니다.
  3. 코팅 도포 스펀지 또는 손바닥 크기로 자른 클로스에 제품을 적셔 도장면 전체에 고르게 펴 바릅니다.
  4. 도포 직후 시간을 지체하지 않고 별도의 건조한 클로스로 잉여분을 완전히 닦아냅니다.

Also known as: 간바스, ganbas, Ganbass Quin, Quin Type-c, 간바스 퀸, QUIN, Ganbass QUIN

한국어로 보기

Sources