Quin

Quin(Type-c)은 도장면에 틈 없는 치밀한 보호 피막을 형성하는 것에 집중하여 개발된 하드닝 코팅제입니다. 광택이나 발수보다 화학적 결합력을 통한 피막의 완전성을 최우선으로 추구하며, 결과적으로 강한 발수 효과도 부수적으로 발생합니다. 화이트, 실버, 레드, 블루, 건메탈 등 밝은 계열 및 중간 색상의 도장에 설계되었으며, 도장되지 않은 금속면에도 적용 가능하나 블랙 도장에는 사용 불가합니다.

브랜드
Ganbass
카테고리
Exterior : Coating

핵심 특징

사용법

  1. ORIGIN 탈지 샴푸로 세차 후, REBOOT 시리즈로 하지 처리를 진행합니다(가벼운 오염이라면 데포린 또는 REBOOT-GEL 사용 후 REBOOT 적용).
  2. 블로어 등을 이용해 차체의 물방울을 완전히 제거합니다.
  3. 코팅 도포 스펀지 또는 손바닥 크기로 자른 클로스에 제품을 적셔 도장면 전체에 고르게 펴 바릅니다.
  4. 도포 직후 시간을 지체하지 않고 별도의 건조한 클로스로 잉여분을 완전히 닦아냅니다.

Quin (Type-c) is a hardened paint coating agent developed with a singular focus on forming a dense, gap-free protective film over the paint surface — conceptually like fitting a high-performance waterproof membrane to the car body. Rather than prioritizing gloss or water-beading, it maximises film integrity through chemical bonding strength, which incidentally also results in strong beading. Intended for light and mid-tone paint colors (white, silver, red, blue, gunmetal, etc.) and also applicable to uncoated metal surfaces; not suitable for black paint.

Key features

  • Dense, gap-free film formation for maximum paint protection
  • Chemical bonding strength rather than residue-dependent adhesion
  • Strong water-beading as a natural result of dense film
  • Low application difficulty suitable even for beginners
  • Applicable to non-black paint colors and bare metal surfaces
  • Single-layer standalone coating design

Usage

  1. Complete surface preparation: wash with ORIGIN Degreasing Shampoo, then carry out paint correction using the REBOOT series (or Deposrin / REBOOT-GEL for lighter soiling).
  2. Remove all water droplets from the car body using a blower or similar tool.
  3. Apply the product to a coating applicator sponge or palm-sized cloth and spread it evenly over the paint surface.
  4. Without delay after spreading, buff off all excess product with a separate dry cloth.

다른 이름: 간바스, ganbas, Ganbass Quin, Quin Type-c, 간바스 퀸, QUIN, Ganbass QUIN

View in English

출처