Ionixcoat
이오닉스코트
Ionixcoat is an ion-based coating agent designed for vehicle interiors and indoor surfaces, providing a protective film that reduces dirt adhesion and makes cleaning easier. It is completely water-based and VOC-free, making it safe for use in living spaces on a wide range of surfaces including dashboards, LCD screens, leather, glass, and bathroom fixtures. The coating also offers mild scratch suppression on screens and prevents cracking in leather seats.
이오닉스코트는 차량 내부 및 실내 표면을 위한 이온 기반 코팅제로, 오염물 고착을 억제하고 청소를 더 쉽게 만드는 보호막을 형성합니다. 완전한 수성 제품으로 VOC가 없어 생활공간에서도 안전하게 사용할 수 있으며, 대시보드, 액정 화면, 합성 피혁, 유리, 욕실 설비 등 다양한 표면에 시공 가능합니다. 화면 스크래치 억제 효과와 가죽 시트 갈라짐 방지 효과도 있습니다.
- Brand
- Ganbass
- Categories
- Interior : Trim Sealants
- Primary dilution
- RTU ~ 1:1
Key features
- Ion-based interior coating technology
- Prevents dirt adhesion and simplifies cleaning
- VOC-free, water-based formula for safe indoor use
- Mild gloss enhancement for plastic and dashboard surfaces
- Scratch suppression on LCD screens and smartphone displays
- Cracking prevention for leather seats
- Applicable to a wide range of non-absorbent surfaces
- Dilutable up to 1:1 for cost-effective use
Dilution
- Interior : Trim Sealants — RTU ~ 1:1 (1:0-1) (primary)
Usage
- For dry application (vehicle interior, electronics, LCD screens): wipe off any dust and dirt from the surface with a dry cloth.
- Spray the coating directly onto the surface or apply it to a cloth and rub it in thoroughly.
- After spreading, wipe away excess with a damp cloth wrung firmly dry, then finish with a dry cloth wipe.
- For wet application (bathroom, sink, toilet): clean the surface with detergent first, then spray the coating onto the surface while it is still slightly wet.
- Rub the coating in with a damp cloth, rinse off excess with water, and finish with a dry cloth.
핵심 특징
- 이온 기반 내부 코팅 기술
- 오염물 고착 방지 및 청소 간소화
- VOC 없는 수성 포뮬라로 실내 안전 사용
- 플라스틱 및 대시보드 표면의 은은한 광택 향상
- 액정 화면 및 스마트폰 디스플레이 스크래치 억제
- 가죽 시트 갈라짐 방지
- 수분 흡수가 없는 다양한 표면에 시공 가능
- 최대 1:1 희석으로 비용 절감 가능
사용법
- 건식 시공(차량 내부, 전자기기, 액정 화면): 먼저 마른 천으로 먼지와 오염물을 닦아냅니다.
- 코팅제를 표면에 직접 스프레이하거나 천에 뿌려 꼼꼼히 문질러 바릅니다.
- 도포 후 물에 적셔 꽉 짠 천으로 잔여분을 닦아내고, 마지막으로 마른 천으로 마무리합니다.
- 습식 시공(욕실, 싱크대, 화장실): 먼저 세제로 오염을 제거한 후, 표면이 약간 젖어 있는 상태에서 코팅제를 스프레이합니다.
- 적셔 짠 천으로 코팅제를 문질러 바른 후 물로 잔여분을 헹궈내고 마른 천으로 마무리합니다.
Also known as: 간바스, ganbas, Ganbass Ionixcoat, 간바스 Ionixcoat, 간바스 이오닉스코트