BP-MIX

비피 믹스

BP-MIX is an original Ganbass over-coating agent developed to maximize gloss and scratch resistance on automotive paint. Its extremely high lubricity dramatically reduces friction on the paint surface, making it especially effective in snow regions and for vehicles regularly entering car washes. It can also be used on wheels, metal trim, and lens covers, and works as a top coat over hardened ceramic coatings.

BP-MIX는 자동차 도장면의 광택과 흠집 저항성을 극한까지 끌어올리기 위해 개발된 간바스 오리지널 오버 코팅제입니다. 극히 높은 활성으로 도장 표면의 마찰을 크게 줄여 주며, 적설 지역 차량이나 세차기를 자주 이용하는 차량에 특히 효과적입니다. 휠·금속 부품·렌즈 커버에도 사용 가능하며, 경화계 코팅 위의 오버 코팅으로 활용할 수 있습니다.

Brand
Ganbass
Categories
Exterior : Coating
Primary dilution
RTU

Key features

Dilution

Usage

  1. After washing, clean the paint surface with REBOOT or a silicone remover to remove deposits.
  2. Confirm the paint surface is free of moisture, then cut a detail cloth to palm size and apply a small amount of BP-MIX to the cloth.
  3. Spread the product evenly over the paint surface, or spray it directly and spread; immediately wipe off any excess with a dry cloth.
  4. Check the finished surface for streaks or uneven areas, then allow at least 30 minutes before touching or exposing to rain.

핵심 특징

  • 도장면 광택 및 깊이감 극대화
  • 최고 수준의 활성으로 표면 스크래치 감소
  • 적설 지역 및 세차기 이용 차량에 적합
  • 약발수 포뮬러로 발수 흔적 최소화
  • 휠·금속 부품·렌즈 커버에 사용 가능(유리 제외)
  • 경화계 코팅 위 오버 코팅으로 활용 가능
  • 효과 지속 기간 약 3~6개월

사용법

  1. 세차 후 REBOOT 또는 실리콘 오프로 도장면의 오염물을 제거하세요.
  2. 도장면에 수분이 없음을 확인한 후, 디테일 클로스를 손바닥 크기로 잘라 BP-MIX를 소량 적시세요.
  3. 도장면에 고르게 펴 바르거나 직접 분사 후 펴 바르고, 즉시 마른 클로스로 여분을 닦아 내세요.
  4. 얼룩이나 불균일한 부분이 없는지 확인하고, 시공 후 최소 30분간 도장면 접촉 및 빗물을 피하세요.

Also known as: 간바스, ganbas, Ganbass BP-MIX, 간바스 BP-MIX, 간바스 비피 믹스

한국어로 보기

Sources