GBS-G
지비에스 지
GBS-G is a redesigned window glass scale-removal compound that uses a specially selected abrasive to deliver superior descaling power while drastically reducing the risk of polish marks — even under strong hand pressure. It also functions as an oil-film remover and can be used with a polishing machine, making it a versatile glass pre-treatment for modern ADAS-equipped vehicles.
GBS-G는 특수 선별 연마제를 사용하여 강한 손 압력에서도 연마 흔적이 거의 생기지 않으면서 기존 대비 높은 물때 제거력을 발휘하는 창유리 물때 제거제입니다. 유막 제거에도 활용되며 연마기 사용도 가능해, 최신 ADAS 탑재 차량의 유리 하지 처리에 적합한 다용도 유리 연마제입니다.
- Brand
- Ganbass
- Categories
- Exterior : Glass Cleaner
Key features
- Specially selected abrasive with minimal polish-mark risk
- High water scale (mineral deposit) removal power
- Also removes oil films from glass
- Compatible with polishing machines
- Designed for modern ADAS glass with minimal abrasion
- Simple ingredient composition — low risk of glass etching
- Industry-leading low price point
Usage
- Wash the vehicle beforehand to rinse away sand and other particles that could cause scratches during polishing.
- Mask off surrounding areas with masking tape to prevent accidental polishing of non-glass surfaces.
- Shake the container gently before use. If diluting with water, do so in a separate container.
- Dispense a suitable amount onto a felt sponge and polish in approximately 30 cm × 30 cm sections. For softer action or wider coverage, a halved tire-dressing sponge can be used instead.
- When the abrasive begins to dry, add water with a spray bottle to keep working. Once finished, lightly wipe with a damp cloth and rinse with water to check scale removal.
- After rinsing, wipe dry with a clean cloth. Apply a glass sealant if desired.
핵심 특징
- 연마 흔적 위험이 극히 낮은 특수 선별 연마제
- 높은 물때(미네랄 침착) 제거력
- 유막 제거에도 활용 가능
- 연마기 사용 가능
- 최신 ADAS 유리에 적합한 최소 마모 설계
- 간소한 성분 구성 — 유리 침식 위험 낮음
- 업계 최저 수준의 가격대
사용법
- 사전에 세차하여 연마 중 스크래치 원인이 될 수 있는 모래 등을 헹궈냅니다.
- 유리 이외의 주변 부위를 마스킹 테이프로 보양합니다.
- 사용 전 용기를 가볍게 흔듭니다. 물로 희석할 경우 별도 용기에서 희석합니다.
- 펠트 스폰지에 적당량 덜어 30cm 사방 구역씩 닦습니다. 부드럽게 또는 넓은 면적을 작업할 경우 타이어 도포 스폰지를 반으로 자른 것을 사용할 수도 있습니다.
- 연마제가 건조해지면 분무기로 물을 추가합니다. 작업 후 젖은 클로스로 가볍게 닦고 물로 헹궈 물때 제거 상태를 확인합니다.
- 헹군 후 깨끗한 클로스로 건조 닦음하여 마무리합니다. 원하는 경우 유리 코팅제를 시공합니다.
Also known as: 간바스, ganbas, Ganbass GBS-G, 간바스 지비에스 지, 간바스 GBS-G, GBS G, GBS-G 窓ガラスウロコ除去剤, GBSジー