Nano Coat v2 Pro
나노 코트 v2 프로
파이어볼 · fire · Fireball Nano Coat v2 Pro · NC v2 Pro · 파이어볼 나노 코트 v2 프로
Nano Coat v2 Pro features a completely redesigned formula that doubles the durability of the original Nano Coat v2, extending super-hydrophobic protection up to one year for the Pro version. The same ease of installation and glossy, slick finish that made the original popular is retained, now pushed further by molecular-level optimizations. Note: availability of the SLICK variant depends on regional climate conditions.
Nano Coat v2 Pro는 전면 개선된 포뮬라로 기존 나노 코트 v2 대비 내구성이 두 배 향상된 제품으로, Pro 버전 기준 최대 1년간 초발수 보호를 제공합니다. 기존 제품의 장점인 쉬운 시공성과 광택 있고 슬릭한 마감은 그대로 유지하면서 분자 수준의 최적화를 통해 성능을 더욱 끌어올렸습니다. SLICK 버전의 판매 여부는 지역 기후 조건에 따라 다를 수 있습니다.
- Brand
- Fireball
- Categories
- Exterior : Coating
- Primary dilution
- RTU
Key features
- Doubled durability versus original Nano Coat v2
- Super-hydrophobic protection up to 1 year (Pro) / 6-12 months (Customer)
- Glossy and slick ceramic finish
- Molecular-level formula optimization
- Easy application process
Dilution
- Exterior : Coating — RTU (1:0) (primary)
Usage
- Wash and fully prep the surface using Reborn.
- Tuck a microfiber suede into the Fireball applicator block slits and apply a few drops of coating onto the suede; a little goes a long way.
- Apply the coating in smooth, even lines, overlapping each pass by 20%; add more carefully if the layers appear thin or invisible.
- Set a timer for 4 to 5 minutes and wait for the coating to bond.
- Wipe off the surface with a clean microfiber towel once the coating has adhered; note how soon excess needs to be removed for future applications.
- Replace the applicator suede sheet as needed.
- Keep the vehicle out of the elements for 48 hours after application.
핵심 특징
- 기존 나노 코트 v2 대비 내구성 2배 향상
- 최대 1년(Pro) / 6~12개월(Customer) 초발수 보호
- 광택 있고 슬릭한 세라믹 마감
- 분자 수준의 포뮬라 최적화
- 편리한 시공 과정
사용법
- Reborn을 사용하여 표면을 세차하고 완전히 전처리합니다.
- Fireball 어플리케이터 블록 슬릿에 마이크로파이버 스웨이드를 끼우고 코팅을 몇 방울 떨어뜨립니다. 소량으로도 충분합니다.
- 코팅을 부드럽고 고르게 직선으로 도포하되 각 라인을 20% 겹치고, 레이어가 얇거나 보이지 않으면 조심스럽게 추가합니다.
- 타이머를 4~5분으로 설정하고 코팅이 결합되도록 기다립니다.
- 코팅이 붙으면 깨끗한 마이크로파이버 타월로 닦아내고, 다음 시공을 위해 잔여물 제거 타이밍을 메모해 둡니다.
- 어플리케이터 스웨이드 시트는 필요에 따라 교체합니다.
- 시공 후 48시간 동안 차량을 외부 환경에 노출시키지 않습니다.