Fictech Ironizer Tutti Frutti 122 Dilution Ratios & User Guide

Fictech Ironizer Tutti Frutti 122 dilution ratio and pH specification chart

아이언나이저 투티 프루티 122

Fictech Ironizer Tutti Frutti 122 — Exterior : Remover, neutral pH. See full specs and usage on the Find Your Detail product page: https://findyourdetail.io/products/fictech/ironizer-tutti-frutti-122

Fictech 아이언나이저 투티 프루티 122 — Exterior : Remover, pH neutral. 전체 사양·사용법은 Find Your Detail 제품 페이지에서 확인하세요: https://findyourdetail.io/products/fictech/ironizer-tutti-frutti-122

Ironizer Tutti Frutti 122 is a semi-gel iron fallout remover with a neutral, acid-free formula that clings to surfaces for extended dwell time. It turns purple on contact with rust and iron oxide particles, making contamination visible, and works on a wide range of surfaces including paint, wheels, glass, and PPF.

아이언나이저 투티 프루티 122는 반젤 타입의 철분 제거제로, 산 성분이 없는 중성 포뮬러가 표면에 오래 밀착되어 작용 시간을 늘려줍니다. 녹과 철산화물 입자에 닿으면 보라색으로 변해 오염 부위를 눈으로 확인할 수 있으며, 도장면, 휠, 유리, PPF 등 다양한 표면에 사용할 수 있습니다.

Brand
Fictech
Categories
Exterior : Remover
Primary dilution
RTU
pH
neutral (7)
Where to buy
Amazon (US) — As an Amazon Associate, Find Your Detail earns from qualifying purchases.
Last updated
2026-07-06

Key features

Dilution

UseDilutionRatio
Exterior : Remover (primary)RTU1:0

Usage

  1. Make sure the surface (wheels, bodywork, glass) is dry and free of dust before application.
  2. Spray the product directly onto the surface from about 15-20 cm away, working from bottom to top.
  3. Let it dwell for 5 to 10 minutes; the color will turn purple as it dissolves embedded iron particles.
  4. For heavily contaminated areas like wheels, optionally agitate lightly with a soft brush.
  5. Rinse thoroughly with clean water, ideally at high pressure, to remove all residue and dissolved contaminants.
  6. Inspect the surface after rinsing and repeat on any remaining resistant spots.

핵심 특징

  • 표면 밀착 시간을 늘려주는 반젤 텍스처
  • 산 성분 없는 중성 pH 포뮬러
  • 녹과 반응하면 보라색으로 변하는 색상 인디케이터
  • 침투력을 높이는 계면활성제
  • 가벼운 잔여 부식 방지 효과
  • 희석 없이 바로 사용 가능
  • 상큼한 투티 프루티 향

사용법

  1. 도포 전 표면(휠, 차체, 유리)이 건조하고 먼지가 없는 상태인지 확인한다.
  2. 15~20cm 거리에서 아래에서 위 방향으로 표면에 직접 분사한다.
  3. 5~10분간 방치하면 철분 입자가 분해되면서 보라색으로 변한다.
  4. 휠처럼 오염이 심한 부위는 필요시 부드러운 브러시로 가볍게 문질러준다.
  5. 잔여물과 용해된 오염물을 제거하기 위해 가능하면 고압으로 충분히 헹군다.
  6. 헹군 후 표면을 점검하고 남은 부위가 있으면 다시 적용한다.

Also known as: 피크테크, fic, Fictech Ironizer Tutti Frutti 122, 픽테크 아이언나이저 투티 프루티 122, 122

한국어로 보기

Sources

Related products

More from Fictech

More Remover products

Explore more