Fresso Iron Remover Dilution Ratios & User Guide
아이언 리무버
Fresso Iron Remover — Exterior : Remover. See full specs and usage on the Find Your Detail product page: https://findyourdetail.io/products/fresso/iron-remover
Fresso 아이언 리무버 — Exterior : Remover. 전체 사양·사용법은 Find Your Detail 제품 페이지에서 확인하세요: https://findyourdetail.io/products/fresso/iron-remover
Iron fallout remover that dissolves metallic particles and flying rust on paint and wheels. The active ingredients turn red as they react, and the semi-gel texture clings to vertical panels for a longer dwell time. Formulated with a perfume scent to reduce the harsh smell typical of this product category.
도장면과 휠에 박힌 금속 입자와 비산 녹을 분해해 주는 아이언 리무버입니다. 반응 시 붉은색으로 변해 작용 여부를 눈으로 확인할 수 있으며, 반젤 타입이라 수직면에서도 흘러내리지 않고 머무릅니다. 향수 계열 향으로 이 카테고리 특유의 강한 냄새를 완화했습니다.
- Brand
- Fresso
- Categories
- Exterior : Remover
- Primary dilution
- RTU
- Last updated
- 2026-08-16
How it works
- Iron remover (turns purple) — Reacts with iron particles, turning purple with a distinct sulphur smell.
- Glycol ether solvent — Dissolves oil film and traffic film; can soften some plastics and rubber.
- Citrus solvent — Citrus-derived solvent that dissolves tar and adhesive.
- anionic surfactants — Ionic types of the surfactants used in this product.
- Solvent-based — Built mainly on organic solvents; ventilate and spot-test on interior plastics.
Disclosed ingredients
| Ingredient | CAS | Function |
|---|---|---|
| Sodium thioglycolate (sodium mercaptoacetate) | 367-51-1 | Reducing agent |
| Alcohols, C12-14, ethoxylated, sulfates, sodium salts (SLES) | 68891-38-3 | Anionic surfactant |
| Dipropylene glycol monomethyl ether (DPM) | 34590-94-8 | Solvent |
| d-Limonene | 5989-27-5 | Solvent |
| Reaction mass of CMIT and MIT (3:1) | 55965-84-9 | Preservative |
Ingredients disclosed in the manufacturer's Safety Data Sheet. A safety data sheet lists hazardous components only, so this is not a full formula.
Key features
- Reacts on contact and turns red on metallic contaminants
- Semi-gel texture for longer dwell time
- Safe for paint and wheels
- Reduced harsh odor with a perfume fragrance
Dilution
| Use | Dilution | Ratio |
|---|---|---|
| Exterior : Remover (primary) | RTU | 1:0 |
Usage
- Make sure the surface is cool to the touch before applying.
- Spray the product onto the contaminated area and let it dwell for around 2 to 3 minutes.
- Do not let the product dry on the surface.
- Spread the product with a soft brush.
- Rinse thoroughly with a pressure washer.
- Repeat the process if contamination remains.
핵심 특징
- 금속성 오염물에 반응해 붉은색으로 변색
- 수직면에도 잘 붙는 반젤 타입
- 도장과 휠에 안전
- 향수 계열 향으로 자극적인 냄새 완화
사용법
- 도포 전 표면이 충분히 식어 있는지 확인합니다.
- 오염 부위에 분사한 뒤 약 2~3분 정도 둡니다.
- 제품이 표면에서 마르지 않도록 주의합니다.
- 부드러운 브러시로 골고루 펴 줍니다.
- 고압수로 깨끗이 헹궈 냅니다.
- 오염이 남아 있다면 같은 과정을 반복합니다.
Also known as: 프레소, Fresso Iron Remover, IR, Fresso IR, 프레소 아이언 리무버, 철분 제거제, Fresso 철분 제거제, Iron Fallout Remover, 프레소 IR
Sources
Related products
More from Fresso
- Scented Wooden Hanger Snow Pearl
- Active Foam
- Fabric Cleaner
- Car Perfume Gentleman
- Car Perfume Infinity Bliss
- Car Perfume Snow Pearl
More Remover products
- Sam's Detailing Iron Reactor
- Dodo Juice Tarmageddon
- Dr. Beasley's Matte Paint Cleanser Pro
- Koch Chemie Insect & DirtRemover
- NANOSKIN SPOT FREE
- P&S Iron Buster Wheel & Paint Decon Remover