Fictech Glide 300 Dilution Ratios & User Guide

Fictech Glide 300 dilution ratio and pH specification chart

글라이드 300

Fictech Glide 300 — Exterior : Polishes, neutral pH. See full specs and usage on the Find Your Detail product page: https://findyourdetail.io/products/fictech/glide-300

Fictech 글라이드 300 — Exterior : Polishes, pH neutral. 전체 사양·사용법은 Find Your Detail 제품 페이지에서 확인하세요: https://findyourdetail.io/products/fictech/glide-300

Glide 300 is a ready-to-use clay bar lubricant that reduces friction between the clay and the vehicle surface for a smooth glide. It lifts embedded contaminants such as tar, tree sap, and road film while protecting paint from micro-scratches, preparing the surface for polishing.

글라이드 300은 클레이바와 차체 표면 사이 마찰을 줄여 부드럽게 미끄러지도록 돕는 즉시 사용 가능한 클레이 윤활제이다. 타르, 수액, 도로 오염물 같은 박힌 이물질을 제거하면서 도장면의 미세 스크래치를 방지하고, 폴리싱 전 표면을 준비해준다.

Brand
Fictech
Categories
Exterior : Polishes
Primary dilution
RTU
pH
neutral (7)
Where to buy
Amazon (US) — As an Amazon Associate, Find Your Detail earns from qualifying purchases.
Last updated
2026-07-06

Key features

Dilution

UseDilutionRatio
Exterior : Polishes (primary)RTU1:0

Usage

  1. Pre-wash the vehicle with a foam cannon or sprayer to remove the heaviest dirt, then hand wash with a mitt and shampoo, rinse, and dry with a clean microfiber.
  2. Shake the bottle lightly to homogenize the formula.
  3. Spray Glide 300 generously and evenly over the area to be treated.
  4. Choose a clay bar of suitable hardness for the contamination level and glide it in straight-line motions while keeping the surface well lubricated with more product.
  5. Wipe off residue with a quality microfiber or rinse, leaving the surface smooth and ready for polishing.

핵심 특징

  • 즉시 사용 가능한 클레이바 윤활제
  • 타르, 수액, 도로 오염물을 제거하는 강력한 세정 성분
  • 마찰을 줄이는 비이온·음이온 계면활성제
  • 고른 분산으로 균일한 디컨타미네이션
  • 사용 후 오염 방지 성분
  • 도장면, 유리, 휠, 세라믹·왁스 코팅에 안전

사용법

  1. 폼건이나 분무기로 사전 세차해 굵은 오염물을 제거한 뒤, 장갑과 샴푸로 손세차하고 헹군 후 마이크로파이버로 건조한다.
  2. 용기를 가볍게 흔들어 내용물을 고르게 섞는다.
  3. 처리할 부위에 글라이드 300을 넉넉하고 고르게 분사한다.
  4. 오염도에 맞는 강도의 클레이바를 선택해 일직선으로 문지르며 표면이 계속 충분히 젖어 있도록 제품을 추가로 뿌린다.
  5. 고급 마이크로파이버로 잔여물을 닦아내거나 헹궈, 폴리싱 준비가 된 매끄러운 표면을 만든다.

Also known as: 피크테크, fic, Fictech Glide 300, 픽텍 글라이드 300, 300

한국어로 보기

Sources

Related products

More from Fictech

More Polishes products

Explore more