LUBRIFICA - Lubricant
루브리피카 - 루브리컨트
LUBRIFICA is a multi-use lubricant for clay work, wet sanding, polishing prep, and film application. It builds a slippery anti-adherent layer that lets clay bars, mitts, and sanding blocks travel without inducing scratches, swirls, or haze. Pigment-free and residue-free, it is film-safe and does not require rinsing.
LUBRIFICA는 클레이 작업, 샌딩, 폴리싱 준비, 필름 시공에 두루 쓰는 다목적 윤활제입니다. 표면 위로 미끄러운 비점착 막을 형성해 클레이바, 클레이미트, 샌딩 블록이 스크래치나 스월 자국 없이 부드럽게 이동하도록 도와줍니다. 색소와 잔여물이 없어 필름 위에서도 안전하며 별도의 헹굼 과정도 필요하지 않습니다.
- Brand
- Labocosmetica
- Categories
- Exterior : Polishes
- Primary dilution
- 1:5~1:20
Key features
- Smooth glide with aggressive clays, abrasive pads, or sanding blocks
- Useful for pad priming before and during polishing
- Leaves no streaks, marks, or silane deposits
- Helps remove polishing dust and residue
- Pigment-free for safe use on glass films and PPF
- Wipe-off only, no rinsing needed
Dilution
- Exterior : Polishes — 1:5~1:20 (1:5-20) (primary)
Usage
- Spray LUBRIFICA on the panel or pad using the suggested ratios about 1 to 5 for clay block, about 1 to 10 for clay bar, about 1 to 15 on PPF, and about 1 to 20 on window or sticker films.
- Keep the surface lubricated throughout the claying or polishing pass so the tool never drags.
- Wipe the residue away with a microfiber afterward; rinsing is not required.
핵심 특징
- 공격적 클레이, 연마 패드, 샌딩 블록 위에서도 매끄러운 활주
- 폴리싱 전후 패드 프라이밍에 유용
- 줄무늬, 자국, 실레인 잔여물 없음
- 폴리싱 분진과 잔여물 제거에 도움
- 색소 무함유로 글라스 필름과 PPF에 안전
- 닦아내기만 하면 되며 헹굼 불필요
사용법
- 권장 비율로 LUBRIFICA를 패널이나 패드에 분사합니다 (클레이 블록 약 1대5, 클레이바 약 1대10, PPF 약 1대15, 윈도우·스티커 필름 약 1대20).
- 클레잉이나 폴리싱이 진행되는 동안 표면이 마르지 않도록 윤활 상태를 유지합니다.
- 작업 후 마이크로파이버로 잔여물을 닦아내며, 별도의 헹굼은 필요하지 않습니다.