Fictech Acid Rust Remover 933 Dilution Ratios & User Guide

Fictech Acid Rust Remover 933 dilution ratio and pH specification chart

애시드 러스트 리무버 933

Fictech Acid Rust Remover 933 — Exterior : Remover, acid pH, base dilution 1:3~1:12. At 1:3, mix about 333.3 ml of Fictech Acid Rust Remover 933 per 1 L of water. For a foam cannon or an exact bucket amount, use the Find Your Detail dilution calculator on the product page: https://findyourdetail.io/products/fictech/acid-rust-remover-933

Fictech 애시드 러스트 리무버 933 — Exterior : Remover, pH acid, 기본 희석 1:3~1:12. 1:3 기준 물 1L당 Fictech 애시드 러스트 리무버 933 약 333.3ml. 폼캐논이나 정확한 버킷 용량은 제품 페이지의 Find Your Detail 희석 계산기에서 계산하세요: https://findyourdetail.io/products/fictech/acid-rust-remover-933

A concentrated acidic preparation (pH ~0) designed for the renovation and deoxidation of contaminated surfaces. It strips rust, oxidation and stubborn mineral deposits from painted bodywork, rubber seals and various substrates, restoring a clean finish. Because it is extremely acidic it is used at short contact time, must never be applied to aluminium or anodized metals, and is always rinsed abundantly.

오염된 표면의 재생과 탈산(산화 제거)을 위해 설계된 고농축 산성 제품(pH 약 0)입니다. 도장 차체·고무 실링·다양한 소재에서 녹·산화물·고착된 미네랄 침전물을 제거해 깨끗한 마감을 되살립니다. 매우 강한 산성이므로 짧은 접촉 시간으로 사용하고, 알루미늄이나 아노다이징 금속에는 절대 사용하지 않으며, 항상 충분히 헹궈냅니다.

Brand
Fictech
Categories
Exterior : Remover
Primary dilution
1:3~1:12
pH
acid (1)
Where to buy
Amazon (US) — As an Amazon Associate, Find Your Detail earns from qualifying purchases.
Last updated
2026-07-12

Key features

Dilution

UseDilutionRatio
Exterior : Remover (primary)1:3~1:121:3-12

Usage

  1. Wear gloves and eye protection before handling this strongly acidic product.
  2. Dilute with water from about 1:3–1:4 for heavy renovation up to 1:10–1:12 for light maintenance.
  3. Apply to the contaminated surface and leave only a brief contact time — never let it dry.
  4. Agitate lightly if needed, keeping the product off aluminium and anodized metals.
  5. Rinse the surface abundantly with water immediately after treatment.

핵심 특징

  • 고농축 산성 pH 약 0 탈산제
  • 녹·산화물·미네랄 침전물 제거
  • 도장 차체·고무·다양한 소재 대응
  • 중작업 1:3부터 경작업 1:12까지 희석
  • 짧은 접촉 시간, 충분한 헹굼

사용법

  1. 강산성 제품이므로 취급 전 장갑과 보안경을 착용합니다.
  2. 중작업은 약 1:3~1:4, 경작업 유지관리는 1:10~1:12로 물에 희석합니다.
  3. 오염 표면에 도포하고 짧은 접촉 시간만 두며 절대 마르게 두지 않습니다.
  4. 필요하면 가볍게 문지르되 알루미늄·아노다이징 금속에는 닿지 않게 합니다.
  5. 작업 직후 표면을 물로 충분히 헹궈냅니다.

Also known as: 피크테크, fic, FicTech Acid Rust Remover 933, Fictech Acid Rust Remover 933, 933, FicTech 933, 애시드 러스트 리무버, 픽테크 애시드 러스트 리무버, Derouillant Acide 933, FicTech 933 Rust Remover

한국어로 보기

Sources

Related products

More from Fictech

More Remover products

Explore more