Fictech Car Gliss 601 V2 Dilution Ratios & User Guide

카 글리스 601 V2
Fictech Car Gliss 601 V2 — Exterior : Coating, acid pH. See full specs and usage on the Find Your Detail product page: https://findyourdetail.io/products/fictech/car-gliss-601-v2
Fictech 카 글리스 601 V2 — Exterior : Coating, pH acid. 전체 사양·사용법은 Find Your Detail 제품 페이지에서 확인하세요: https://findyourdetail.io/products/fictech/car-gliss-601-v2
Car Gliss 601 V2 is a premium finishing sealant combining SiO2, carnauba and fluorocarbons to give paint extra gloss, smoothness and easier upkeep right after use. It is meant for finishing after a wash or correction, or for topping up an existing protection, and it improves slickness, beading and resistance to road film buildup.
카 글리스 601 V2는 SiO2, 카나우바, 불소화합물을 조합한 프리미엄 마감용 실란트로, 사용 직후 도장면에 광택과 매끈함을 더하고 관리를 쉽게 해준다. 세차나 폴리싱 후 마무리 단계나 기존 보호막 유지관리용으로 적합하며, 미끄러짐성, 물방울 맺힘, 도로 오염물 부착 저항성을 향상시킨다.
- Brand
- Fictech
- Categories
- Exterior : Coating
- Primary dilution
- RTU
- pH
- acid (5)
- Where to buy
- Amazon (US) — As an Amazon Associate, Find Your Detail earns from qualifying purchases.
- Last updated
- 2026-07-06
Key features
- SiO2 + carnauba + fluorocarbon sealant blend
- Adds gloss, depth and smooth slick surface feel
- Improves water beading and road-film resistance
- Ready to use, no dilution needed
- Suited for finishing after wash/correction or topping up existing protection
Dilution
| Use | Dilution | Ratio |
|---|---|---|
| Exterior : Coating (primary) | RTU | 1:0 |
Usage
- Wash and thoroughly dry the vehicle, decontaminating first if the surface is contaminated.
- Spray the product directly onto a small section of the surface or onto a microfiber applicator pad.
- Spread the product evenly with the pad using straight or circular motions to cover the area.
- Wipe immediately with a clean, dry microfiber towel until a glossy, even finish is achieved.
- Let the vehicle sit for about 12 hours undisturbed so the product can fully cure.
핵심 특징
- SiO2, 카나우바, 불소화합물이 결합된 실란트
- 광택, 깊이감, 매끈한 표면 질감 부여
- 물방울 맺힘 및 도로 오염물 부착 저항성 향상
- 희석 없이 바로 사용 가능
- 세차·폴리싱 후 마무리 또는 기존 보호막 유지관리에 적합
사용법
- 차량을 세차하고 완전히 건조시키며, 오염이 심한 경우 먼저 디콘타미네이션을 진행한다.
- 제품을 표면 일부 구역이나 마이크로파이버 어플리케이터 패드에 직접 분사한다.
- 패드를 이용해 직선 또는 원형으로 문질러 제품을 고르게 펴 바른다.
- 깨끗하고 마른 마이크로파이버 타월로 즉시 닦아내어 광택 있고 균일한 마감을 만든다.
- 제품이 완전히 경화되도록 약 12시간 동안 차량을 건드리지 않고 둔다.
Also known as: 피크테크, fic, CAR GLISS 601 V2, Fictech CAR GLISS 601 V2, FT CAR GLISS 601 V2, 601, 픽테크 카 글리스 601 V2, 카 글리스 601
Sources
Related products
More from Fictech
More Coating products
- Soft99 New Soft 99 Wax Pearl Metallic
- Shine Supply Beadlock Black
- Stjärnagloss Glasyr
- ADBL Blackouter
- Swissvax Bike Sheen
- Vanguard Super Protection Graphene Ceramic Coating