Boost+
부스트+
이우카 · EWO · 이우 · Ewocar Boost+ · 이워카 부스트+
Boost+ is an entry-level ceramic coating designed for enthusiasts and professionals alike, suitable as either a performance booster over an existing coating or as a standalone protective layer. It spreads easily, wipes off cleanly without hazing, and delivers an extremely hydrophobic, slick finish that repels water, dirt, and contaminants. Compatible with paint, chrome, plastic trim, and wheels.
부스트+는 기존 코팅 위에 성능을 향상시키거나 단독 보호막으로 사용할 수 있는 입문자 친화적 세라믹 코팅입니다. 도포가 쉽고 뭉침 없이 깔끔하게 닦아지며, 물·오염물·먼지를 튕겨내는 강한 발수 표면을 만들어줍니다.
- Brand
- EWOCAR
- Categories
- Exterior : Coating
Key features
- Suitable for all skill levels — easy to apply and wipe off
- Extremely hydrophobic and slick finish
- Multi-surface: paint, chrome, plastic trim, and wheels
- Bonds within minutes of application
Usage
- Ensure the surface is clean, dry, and free of oils or residue; use Degreaser for optimal bonding.
- Apply a few drops of Boost+ onto a microfiber coating applicator and work in small sections (approximately 50×50 cm).
- Wait 30–60 seconds depending on temperature and humidity, then wipe off with a microfiber towel.
- Avoid water contact for at least 12 hours after application.
핵심 특징
- 모든 숙련도에 적합 — 쉬운 도포 및 닦아내기
- 극강의 발수성과 매끄러운 표면
- 도료·크롬·플라스틱 트림·휠 등 다양한 표면 적용 가능
- 도포 후 수 분 내에 결합 완료
사용법
- 표면이 깨끗하고 건조하며 오일이나 잔여물이 없는지 확인하고, 최적의 밀착을 위해 디그리서를 사용합니다.
- 마이크로파이버 코팅 어플리케이터에 부스트+를 몇 방울 떨어뜨리고 약 50×50cm 단위로 나누어 작업합니다.
- 온도와 습도에 따라 30~60초 대기한 후 마이크로파이버 타올로 닦아냅니다.
- 도포 후 최소 12시간 물 접촉을 피합니다.