WheelPro
휠프로
이우카 · EWO · 이우 · Ewocar WheelPro · WP · Ewocar WP · 이워카 휠프로
WheelPro is a high-strength ceramic coating engineered specifically for wheels, providing a transparent, ultra-durable protective layer that withstands extreme heat, brake dust, road salt, and harsh chemicals. Formulated with advanced SiO₂ technology, it creates a super-hydrophobic surface that repels iron particles and dirt, dramatically reducing contamination adhesion. Compatible with painted, powder-coated, matte, chrome, and polished rims.
휠프로는 휠 전용으로 설계된 고강도 세라믹 코팅으로, 극한의 열과 브레이크 분진, 노면 염분, 강한 화학물질에 견디는 내구성 있는 보호막을 형성합니다. 첨단 SiO₂ 기술로 만들어진 초발수 표면은 철분 입자와 오염물의 부착을 크게 줄여줍니다.
- Brand
- EWOCAR
- Categories
- Exterior : Tire&Wheel Sealant
Key features
- Thermal resistance up to 1,000°C
- Super-hydrophobic surface repels brake dust and iron particles
- Multi-layer compatible — 2–3 coats for extreme conditions
- Forgiving application with excellent leveling
- Suitable for painted, powder-coated, matte, chrome, and polished rims
Usage
- Pre-wash the wheel with ALK PreWash, then apply Bleed Iron Remover; ensure the wheel is completely clean, dry, and cool to the touch.
- Degrease the wheel surface using Ewocar Degreaser.
- Apply WheelPro using a finger coating applicator or application sponge, working in small sections to achieve even coverage and a visible wet film.
- Allow the coating to dwell for 1–3 minutes, then remove excess product with a microfiber towel and lightly buff until the surface is clear and streak-free.
- For a second coat, wait 20 minutes before repeating steps 3–4.
- Cure for at least 18 hours without water contact; full performance is reached after 9–10 days.
핵심 특징
- 최대 1,000°C 내열성
- 브레이크 분진과 철분 입자를 튕겨내는 초발수 표면
- 2~3겹 다중 코팅으로 극한 내구성 확보
- 우수한 레벨링으로 도포 작업이 용이함
- 도색·분체도장·무광·크롬·광택 림 모두 적용 가능
사용법
- ALK 프리워시로 휠을 세척한 뒤 블리드 철분 제거제를 적용하고, 휠이 완전히 깨끗하고 건조한 상태인지 확인합니다.
- 이워카 디그리서로 휠 표면을 탈지 처리합니다.
- 핑거 코팅 어플리케이터 또는 어플리케이션 스펀지를 사용해 작은 구역씩 나누어 젖은 막이 보일 때까지 균일하게 도포합니다.
- 1~3분간 반응시킨 후 마이크로파이버 타올로 잔여물을 제거하고 표면이 맑고 얼룩 없이 될 때까지 가볍게 닦아냅니다.
- 2차 도포 시에는 20분 대기 후 3~4단계를 반복합니다.
- 최소 18시간 물 접촉 없이 건조시키고, 9~10일 후 완전한 경화 및 최고 성능에 도달합니다.