Type 3: 5 Year Ceramic Coating
타입 3: 5년 세라믹 코팅
A TEOS-based ceramic coating designed to deliver up to about 5 years of gloss, slickness, and easier upkeep. The TEOS chemistry reduces clogging and adds fracturing resistance so application stays approachable for both enthusiasts and pros. Helps shield paint from UV, bird droppings, and surface contamination.
TEOS 기반의 세라믹 코팅으로, 광택과 발수감, 손쉬운 관리감을 약 5년까지 유지하도록 만들어졌습니다. TEOS 처방이 막힘과 균열 발생을 줄여주어 입문자와 전문가 모두 다루기 쉽고, UV와 배설물, 외부 오염으로부터 도장면을 보호합니다.
- Brand
- DIY Detail
- Categories
- Exterior : Coating
Key features
- UV protection layer
- Designed for careful, professional-style application
- Hydrophobic surface for easier upkeep
- Durability with added clog resistance
- Defends against bird droppings and contamination
- TEOS-based fracture resistance
- Up to about 5 years of paint protection
Usage
- Start with a panel that is clean and dry.
- Wipe the surface down with DIY Detail Panel Prep before coating.
- Wearing gloves in a ventilated area, prime the applicator with about 8 to 10 drops, then use about 1 to 2 drops per panel.
- Spread the coating on a small section, such as a front fender, using circular motions.
- Let the product dwell about 2 to 5 minutes, adjusting for temperature and humidity.
- Watch the surface as the coating cross-links and shifts from a liquid look to an oil-slick appearance.
- Once roughly half of the area returns to clear, begin leveling the coating.
- Wipe lightly with a short-nap towel; if the towel drags or stays wet, wait about another minute.
- Level with a DIY Level One towel and refine with a Freebird 400 towel.
- Allow about an hour before any rain exposure.
- Wait about 3 days before washing with DIY Detail Rinseless Wash.
핵심 특징
- UV 차단 보호층
- 세심한 전문가식 도포에 맞춘 설계
- 관리가 쉬워지는 발수 표면
- 막힘 저항이 더해진 내구성
- 배설물과 외부 오염 방어
- TEOS 기반 균열 저항
- 최대 약 5년의 도장 보호
사용법
- 깨끗하고 마른 도장면에서 작업을 시작하세요.
- 코팅 전에 DIY Detail Panel Prep으로 표면을 닦아 정리하세요.
- 환기되는 공간에서 장갑을 끼고 어플리케이터에 약 8~10방울로 프라이밍한 뒤 패널당 약 1~2방울만 사용하세요.
- 프론트 펜더처럼 작은 영역부터 원을 그리듯 코팅을 펴 발라주세요.
- 온도와 습도에 따라 약 2~5분 정도 표면에 머무르게 두세요.
- 코팅이 도장면과 결합되며 액상에서 오일슬릭 같은 외관으로 변하는지 살펴보세요.
- 표면의 약 절반이 다시 투명해지기 시작하면 레벨링을 시작하세요.
- 짧은 결의 타월로 가볍게 닦아내고, 끌리거나 젖어 있으면 약 1분 더 기다리세요.
- Level One 타월로 레벨링하고 Freebird 400 타월로 마무리하세요.
- 비에 노출되기 전에 약 1시간 정도 시간을 주세요.
- 약 3일이 지난 뒤 DIY Detail Rinseless Wash로 세차하세요.