8 Year Ceramic Coating with Applicator (Type 2)
8년 세라믹 코팅 (타입 2, 어플리케이터 포함)
A pro-grade Type 2 ceramic coating combining polysilazane, SiN, SiC, and silicon dioxide for extended paint protection that remains DIY-friendly. The PFAS-free formula uses an instant-bond technology to deliver UV defense, hydrophobicity, and long-term gloss. It can also serve as the base layer in The Stack alongside the Type 2 3 Year Graphene Coating, and an applicator is included.
폴리실라잔과 SiN, SiC, 이산화규소를 함께 적용한 프로 등급 Type 2 세라믹 코팅으로, 긴 보호 기간을 제공하면서도 DIY 시공자에게도 부담이 적습니다. PFAS를 배제한 포뮬러와 인스턴트 본딩 방식 덕분에 자외선 차단과 발수, 도장 보호 효과를 동시에 얻을 수 있습니다. Type 2 3년 그래핀 코팅과 함께 The Stack의 베이스층으로도 활용 가능하며, 전용 어플리케이터가 함께 제공됩니다.
- Brand
- DIY Detail
- Categories
- Exterior : Coating
Key features
- Polysilazane, SiN, SiC, SiO2 composite
- Highest durability in the DIY Detail lineup
- PFAS-free formula
- Instant-bond technology
- Wash-safe after about 3 days
- Drivable after about 1 hour
- UV protection
- Hydrophobic, repels water spots and contaminants
- Pro-grade durability with DIY application
- Applicator included
Usage
- Begin on a clean and fully dry painted surface.
- Wipe the panel with DIY Detail Panel Prep or C6 Adhesion Promoter Polish.
- Wear gloves, work in a ventilated area, and place several drops onto the applicator pad.
- Spread the coating in circular motions across one small section such as a fender.
- Let the product dwell for about 2 to 5 minutes depending on temperature and humidity.
- Watch the surface change from liquid to an oil-slick look as the coating bonds.
- Once roughly half of the area returns to clear, start leveling the coating.
- Pass a Level One towel lightly over the panel and wait another minute if it drags.
- Finish by buffing any high spots with a Freebird 400 towel.
핵심 특징
- 폴리실라잔과 SiN, SiC, SiO2 복합 성분
- DIY Detail 라인업 중 가장 긴 내구성
- PFAS 무첨가 포뮬러
- 인스턴트 본딩 방식
- 약 3일 후 세차 가능
- 약 1시간 후 주행 가능
- 자외선 차단
- 발수 효과로 워터스팟과 오염 방어
- 프로 등급 내구성과 DIY 시공성
- 어플리케이터 포함
사용법
- 도장면이 완전히 깨끗하고 건조된 상태에서 시작합니다.
- DIY Detail 패널 프렙이나 C6 Adhesion Promoter Polish로 표면을 닦아냅니다.
- 장갑을 끼고 환기가 잘되는 공간에서 어플리케이터 패드에 몇 방울을 떨어뜨립니다.
- 앞 펜더처럼 작은 면적부터 원을 그리며 코팅을 펴 바릅니다.
- 온도와 습도에 따라 약 2~5분 정도 자연스럽게 정착시킵니다.
- 표면이 액체에서 기름막처럼 보이는 상태로 변하는지 확인합니다.
- 절반 정도가 다시 투명해지면 레벨링 작업을 시작합니다.
- Level One 타월로 가볍게 닦고, 끌리거나 젖으면 1분 더 기다립니다.
- 마지막으로 Freebird 400 타월로 높은 부분을 다듬어 광을 냅니다.