Find Your Detail · 제품 카탈로그 · 브랜드 · 실사용 영상 · 소개

DIY Detail 8년 세라믹 코팅 (타입 2, 어플리케이터 포함) 희석비 & 사용 가이드

DIY Detail 8년 세라믹 코팅 (타입 2, 어플리케이터 포함) 희석비 pH 스펙 카드

8 Year Ceramic Coating with Applicator (Type 2)

폴리실라잔과 SiN, SiC, 이산화규소를 함께 적용한 프로 등급 Type 2 세라믹 코팅으로, 긴 보호 기간을 제공하면서도 DIY 시공자에게도 부담이 적습니다. PFAS를 배제한 포뮬러와 인스턴트 본딩 방식 덕분에 자외선 차단과 발수, 도장 보호 효과를 동시에 얻을 수 있습니다. Type 2 3년 그래핀 코팅과 함께 The Stack의 베이스층으로도 활용 가능하며, 전용 어플리케이터가 함께 제공됩니다.

브랜드
DIY Detail
카테고리
Exterior : Coating
기본 희석 비율
RTU
최종 업데이트
2026-09-11

공개 성분

성분CAS역할
d-Limonene5989-27-5용제

제조사 물질안전보건자료(SDS)에 공개된 성분입니다. SDS는 유해성 분류 대상 성분만 기재하므로 전 성분 목록이 아닙니다.

핵심 특징

  • 폴리실라잔과 SiN, SiC, SiO2 복합 성분
  • DIY Detail 라인업 중 가장 긴 내구성
  • PFAS 무첨가 포뮬러
  • 인스턴트 본딩 방식
  • 약 3일 후 세차 가능
  • 약 1시간 후 주행 가능
  • 자외선 차단
  • 발수 효과로 워터스팟과 오염 방어
  • 프로 등급 내구성과 DIY 시공성
  • 어플리케이터 포함

희석 비율

용도희석비율
Exterior : Coating (기본)RTU1:0

사용법

  1. 도장면이 완전히 깨끗하고 건조된 상태에서 시작합니다.
  2. DIY Detail 패널 프렙이나 C6 Adhesion Promoter Polish로 표면을 닦아냅니다.
  3. 장갑을 끼고 환기가 잘되는 공간에서 어플리케이터 패드에 몇 방울을 떨어뜨립니다.
  4. 앞 펜더처럼 작은 면적부터 원을 그리며 코팅을 펴 바릅니다.
  5. 온도와 습도에 따라 약 2~5분 정도 자연스럽게 정착시킵니다.
  6. 표면이 액체에서 기름막처럼 보이는 상태로 변하는지 확인합니다.
  7. 절반 정도가 다시 투명해지면 레벨링 작업을 시작합니다.
  8. Level One 타월로 가볍게 닦고, 끌리거나 젖으면 1분 더 기다립니다.
  9. 마지막으로 Freebird 400 타월로 높은 부분을 다듬어 광을 냅니다.

A pro-grade Type 2 ceramic coating combining polysilazane, SiN, SiC, and silicon dioxide for extended paint protection that remains DIY-friendly. The PFAS-free formula uses an instant-bond technology to deliver UV defense, hydrophobicity, and long-term gloss. It can also serve as the base layer in The Stack alongside the Type 2 3 Year Graphene Coating, and an applicator is included.

Key features

  • Polysilazane, SiN, SiC, SiO2 composite
  • Highest durability in the DIY Detail lineup
  • PFAS-free formula
  • Instant-bond technology
  • Wash-safe after about 3 days
  • Drivable after about 1 hour
  • UV protection
  • Hydrophobic, repels water spots and contaminants
  • Pro-grade durability with DIY application
  • Applicator included

Usage

  1. Begin on a clean and fully dry painted surface.
  2. Wipe the panel with DIY Detail Panel Prep or C6 Adhesion Promoter Polish.
  3. Wear gloves, work in a ventilated area, and place several drops onto the applicator pad.
  4. Spread the coating in circular motions across one small section such as a fender.
  5. Let the product dwell for about 2 to 5 minutes depending on temperature and humidity.
  6. Watch the surface change from liquid to an oil-slick look as the coating bonds.
  7. Once roughly half of the area returns to clear, start leveling the coating.
  8. Pass a Level One towel lightly over the panel and wait another minute if it drags.
  9. Finish by buffing any high spots with a Freebird 400 towel.

다른 이름: DIY, DIY-detail, 디와이아이, 8 Year Coating, Type 2 Ceramic Coating, DIY Detail 8YR, 8YR, DIY 8 Year Ceramic, 8년 코팅, DIY 디테일 8년 세라믹 코팅, 타입 2 세라믹 코팅

View in English

출처

  • DIY Detail 공식 제품 페이지
  • 물질안전보건자료 (SDS / MSDS)

관련 제품

DIY Detail의 다른 제품

  • Interior Ceramic Coating
  • Tire Shine Brush
  • Quick Beads
  • Foam Coating/Sealant Applicator
  • Panel Prep
  • DIY Level One 5 Pack

같은 카테고리(Coating) 제품

  • GOOD STUFF Trinity Graphene Coating
  • Adam's Polishes Graphene Ceramic Coating
  • Angelwax Enigma Solaris
  • Soft99 EXTREME GLOSS WAX BLACK
  • Ganbass GRAPHENE COATING MG-STANDARD
  • TAC System Water Flow Coat

더 보기

  • 카테고리·비교·희석 가이드
  • 디테일러가 실제로 쓰는 제품 (영상 분석)