Collinite Slickr Dilution Ratios & User Guide

Collinite Slickr dilution ratio and pH specification chart

슬리커

Collinite Slickr — Exterior : Coating. See full specs and usage on the Find Your Detail product page: https://findyourdetail.io/products/collinite/no-150-slickr

Collinite 슬리커 — Exterior : Coating. 전체 사양·사용법은 Find Your Detail 제품 페이지에서 확인하세요: https://findyourdetail.io/products/collinite/no-150-slickr

Ceramic 3-in-1 spray that adds hydrophobic beading and a slick, glossy finish to exterior surfaces. The SiO2-polymer formula can be used on its own or as a topper over wax, sealant or ceramic coating, and also doubles as a drying aid, clay lubricant and final-inspection detailer.

외부 표면에 발수 비딩과 슬릭한 광택 마감을 더해 주는 세라믹 3-in-1 스프레이입니다. SiO2-폴리머 처방은 단독 보호제로 쓰거나 기존 왁스·실런트·세라믹 코팅 위 토퍼로 사용할 수 있고, 드라잉 에이드·클레이 윤활제·파이널 인스펙션 디테일러로도 활용됩니다.

Brand
Collinite
Categories
Exterior : Coating, Exterior : Quick Detailer, Exterior : Drying Aid
Primary dilution
RTU
Where to buy
Amazon (US) — As an Amazon Associate, Find Your Detail earns from qualifying purchases.
Last updated
2026-06-02

Key features

Dilution

UseDilutionRatio
Exterior : Coating (primary)RTU1:0

Usage

  1. Test in a small inconspicuous area first.
  2. Stand-alone: mist onto a clean 2x2 ft panel, wipe in with a microfiber towel, then buff with a dry side.
  3. As a drying aid: after a wash and while wet, apply 2 sprays per 3x3 ft panel and wipe entirely dry with a microfiber towel.
  4. As a clay lubricant: spray 2 sprays onto the rubberized side of a Colli-Flex decon towel and move it across a 3x3 ft panel in a cross-hatch pattern with minimal pressure.
  5. Apply more product as needed to keep the surface slick; remove residue with a dry microfiber towel.

핵심 특징

  • 약 3개월까지 지속할 수 있는 발수 비딩
  • 슬릭하고 광택 있는 마감
  • 도장·유리·휠·트림에 안전
  • 가벼운 먼지·지문·얼룩 제거
  • 드라잉 에이드·토퍼·클레이 윤활제·쇼카 프렙 등 다용도
  • 왁스·실런트·세라믹·PPF 위에 토퍼로 사용
  • 와이프 온/오프 방식 시공

사용법

  1. 시공 전 눈에 잘 띄지 않는 부위에서 테스트합니다.
  2. 단독 사용: 깨끗한 2x2 ft 패널에 분사한 뒤 마이크로파이버 타월로 펴 바르고, 마른 면으로 닦아 마무리합니다.
  3. 드라잉 에이드: 세차 후 표면이 젖은 상태에서 3x3 ft 패널당 2회 분사하고 마이크로파이버 타월로 완전히 닦아 말립니다.
  4. 클레이 윤활제: 콜리-플렉스 디콘 타월의 러버 면에 2회 분사한 뒤 최소한의 압력으로 3x3 ft 패널을 크로스해치 패턴으로 작업합니다.
  5. 슬릭함이 유지되도록 필요 시 제품을 추가 분사하고, 마른 마이크로파이버 타월로 잔여물을 제거합니다.

Also known as: Coll, 콜리나이트, 콜리나, 콜리, Collinite Slickr, 콜리나이트 슬리커, No. 150, Collinite No. 150, 콜리나이트 150

한국어로 보기

Sources

Related products

More from Collinite

More Coating products

Explore more