Beadcoat
비드코트
SiO2 and graphene spray sealant that delivers ultra-durable hydrophobics with a high-gloss, slick finish on exterior surfaces. The ceramic-graphene resin structure provides 6+ months of stand-alone paint protection and UV- and detergent-resistant shine, and can also boost or top an existing ceramic or graphene coating.
외부 표면에 강력한 발수성과 깊은 광택, 슬릭한 마감을 부여하는 SiO2·그래핀 스프레이 실런트입니다. 세라믹-그래핀 레진 구조로 단독 사용 시 6개월 이상의 도장 보호와 UV·세제 저항성 광택을 제공하며, 기존 세라믹/그래핀 코팅 위에 토퍼로도 사용할 수 있습니다.
- Brand
- Collinite
- Categories
- Exterior : Coating, Exterior : Glass Sealant, Exterior : Drying Aid
Key features
- 6+ months of stand-alone paint protection
- Strong hydrophobic beading
- Compatible over ceramic coatings and PPF
- Safe on paint, glass, wheels and trim
- Easy wipe-on / wipe-off application
- Doubles as a drying aid once a base coat exists
- UV and detergent resistant
Usage
- Ensure the surface is free of above-surface contamination via iron remover and clay (towel or bar) before applying.
- Remove below-surface defects with a DA polish such as No. 390 if needed.
- Mist Beadcoat onto a 2x2 ft section of cool, clean paint.
- Wipe in with a microfiber towel, then flip to a dry side and buff to a high-gloss finish.
- As a drying aid only after a base coat is applied: spray 2 sprays onto a 3x3 ft wet panel and wipe dry with a microfiber towel.
- Test in a small inconspicuous area before full application.
핵심 특징
- 단독 사용 시 6개월 이상의 도장 보호
- 강력한 발수 비딩 효과
- 세라믹 코팅·PPF 위에 호환
- 도장·유리·휠·트림에 안전
- 이지 와이프 온/오프 방식
- 베이스 도포 후 드라잉 에이드로 사용 가능
- UV·세제 저항성
사용법
- 도포 전 아이언 리무버와 클레이(타월/바)로 표면 오염을 제거합니다.
- 필요 시 No. 390 등 DA 폴리시로 표면 결함을 먼저 제거합니다.
- 시원하고 깨끗한 도장면 2x2 ft 구역에 비드코트를 분사합니다.
- 마이크로파이버 타월로 펴 바른 뒤 마른 면으로 닦아 깊은 광택으로 마무리합니다.
- 드라잉 에이드로 사용 시(베이스 도포 후): 3x3 ft 젖은 패널에 2회 분사 후 마이크로파이버 타월로 닦아 말립니다.
- 전체 시공 전 눈에 띄지 않는 작은 부위에서 테스트합니다.