Eagle Guard
이글 가드
chemx · 케미컬엑스 · 케미컬x · 켐엑스 · Chem-X Eagle Guard · EG · 켐엑스 이글 가드
Eagle Guard is a triple-action salt neutralizer and rust inhibitor designed for vehicles and heavy equipment exposed to road salt and brine. A chelating agent breaks down and encapsulates salt particles for thorough rinsing, while a mild alkaline buffer lifts oily grime simultaneously. A built-in corrosion inhibitor then forms an invisible protective barrier that continues to resist oxidation after the rinse.
이글 가드는 도로 염분과 염수에 노출된 차량 및 중장비를 위한 3중 작용 염분 중화 및 녹 방지 제품입니다. 킬레이트 성분이 염분 입자를 분해·포집하여 완전히 헹궈낼 수 있도록 하고, 약알칼리 완충 성분이 유성 오염물을 동시에 제거합니다. 내장된 부식 억제제가 헹굼 후에도 얇은 보호막을 형성하여 산화를 지속적으로 억제합니다.
- Brand
- Chem-X
- Categories
- Exterior : Pre-washing (Pretreatment), Exterior : Foam
- Primary dilution
- 1:4
Key features
- Triple-action: chelation, cleaning, and corrosion inhibition
- Breaks down road salt and brine at molecular level
- Mild alkaline buffer removes oily films and grime
- Built-in rust inhibitor leaves invisible protective barrier
- Safe on paint, aluminum, stainless steel, chrome, and plastic
- No sticky or oily residue
Dilution
- Exterior : Foam — 1:4 (1:4) (primary)
- Exterior : Pre-washing (Pretreatment) — 1:100 (1:100)
Usage
- Optionally pre-rinse the surface with water to remove loose debris.
- Apply Eagle Guard via foam cannon, pump sprayer, or downstream injector, covering the surface from bottom to top.
- Allow at least 30–60 seconds of dwell time.
- For side panels and painted surfaces, agitate with a mitt or soft brush if needed, then rinse thoroughly with high pressure.
- For undercarriage protection, apply generously and optionally skip the rinse to allow the rust inhibitor to fully bond to the metal.
핵심 특징
- 3중 작용: 킬레이션, 세정, 부식 방지
- 분자 수준에서 도로 염분 및 염수 분해
- 약알칼리 완충 성분으로 유성 오염물 제거
- 내장 녹 방지제로 보이지 않는 보호막 형성
- 도장면, 알루미늄, 스테인리스, 크롬, 플라스틱에 안전
- 끈적임이나 유성 잔여물 없음
사용법
- 물로 표면을 미리 헹궈 느슨한 오염물을 제거합니다(선택 사항).
- 폼 캐논, 펌프 스프레이어, 또는 다운스트림 인젝터를 사용해 아래에서 위로 표면에 골고루 도포합니다.
- 최소 30~60초간 반응 시간을 줍니다.
- 도어 패널 및 도장면은 필요 시 장갑이나 부드러운 솔로 문지른 후 고압수로 깨끗이 헹굽니다.
- 하부 보호 목적이라면 충분히 도포한 후 헹굼을 생략하여 녹 방지제가 금속에 완전히 결합되도록 합니다.