Koch Chemie PreFoam Efficient Dilution Ratios & User Guide

Koch Chemie PreFoam Efficient dilution ratio and pH specification chart

프리폼 이피션트

Koch Chemie PreFoam Efficient — Exterior : Pre-washing (Pretreatment), alkali pH, base dilution 1:15~1:30. At 1:15, mix about 66.7 ml of Koch Chemie PreFoam Efficient per 1 L of water. For a foam cannon or an exact bucket amount, use the Find Your Detail dilution calculator on the product page: https://findyourdetail.io/products/koch-chemie/prefoam-efficient

Koch Chemie 프리폼 이피션트 — Exterior : Pre-washing (Pretreatment), pH alkali, 기본 희석 1:15~1:30. 1:15 기준 물 1L당 Koch Chemie 프리폼 이피션트 약 66.7ml. 폼캐논이나 정확한 버킷 용량은 제품 페이지의 Find Your Detail 희석 계산기에서 계산하세요: https://findyourdetail.io/products/koch-chemie/prefoam-efficient

Concentrated alkaline foam pre-cleaner without phosphates, made for the prewash stage on cars, trucks, and self-service bays. Combines complexing agents and surfactants that loosen baked-on insects, bird droppings, and road film, while delivering a thick citrus-scented foam. Approved as VDA Class B at up to 1:100 with a 1-minute maximum dwell.

인산염 없이 만든 알칼리성 폼 프리클리너 농축액으로, 승용차·트럭·셀프 세차장의 사전 세척 단계에서 사용합니다. 컴플렉싱제와 계면활성제 조합이 고착된 벌레 자국, 새똥, 도로 오염을 풀어 주고, 시트러스 향과 함께 풍부한 폼을 만들어 냅니다. VDA 클래스 B 기준은 최대 1:100 농도, 최대 1분 반응 시간으로 충족합니다.

Brand
Koch Chemie
Categories
Exterior : Pre-washing (Pretreatment)
Primary dilution
1:15~1:30
pH
alkali (13)
Where to buy
Search on Amazon (US)
Last updated
2026-08-14

How it works

  • Alkaline cleaning — Alkaline chemistry that breaks down grease; can stain aluminium and matte finishes.
  • Cleaning surfactant — Lifts soil off the surface and disperses it in water.
  • Chelates minerals — Binds metal ions in water to reduce spotting and loss of cleaning power.
  • anionic surfactants — Ionic types of the surfactants used in this product.

Disclosed ingredients

IngredientCASFunction
Sodium hydroxide1310-73-2Alkaline active
Alcohols, C12-14, ethoxylated, sulfates, sodium salts (SLES)68891-38-3Anionic surfactant
Trisodium methylglycinediacetate (MGDA-Na3) (presumed)15763-76-5
Bronopol (2-bromo-2-nitropropane-1,3-diol)52-51-7Preservative

Ingredients disclosed in the manufacturer's Safety Data Sheet. A safety data sheet lists hazardous components only, so this is not a full formula.

Key features

  • Phosphate-free alkaline foam
  • Cuts insects and road film
  • Citrus-scented thick foam
  • VDA Class B at up to 1:100

Dilution

UseDilutionRatio
Exterior : Pre-washing (Pretreatment) (primary)1:15~1:301:15-30

Usage

  1. Mix at 1:20 for insect cleaning, 1:30 for car-chassis prewash, or 1:15 to 1:20 when treating trucks.
  2. Foam the diluted product over the whole vehicle from the bottom upward so it covers the panels evenly.
  3. Within one minute at most, rinse everything off thoroughly with a high-pressure cleaner before it dries.

핵심 특징

  • 인산염 무함유 알칼리 폼
  • 벌레 및 도로 오염 분해
  • 시트러스 향 풍부한 거품
  • VDA 클래스 B (최대 1:100)

사용법

  1. 벌레 제거에는 1:20, 승용차 섀시 사전 세척에는 1:30, 트럭에는 1:15~1:20으로 희석합니다.
  2. 차량 하단에서 시작해 위 방향으로 거품을 올려 차체 전체를 균일하게 덮습니다.
  3. 최대 1분 안에 고압 세척기로 충분히 헹궈 표면에서 마르지 않도록 합니다.

Also known as: KCX, koch-chemie, 코흐, 코흐케미, PFE, Koch PFE, KC PFE, 코흐케미 PFE, PreFoam, 프리폼

한국어로 보기

Sources

  • Koch Chemie official product page
  • Safety Data Sheet (SDS / MSDS)

Related products

More from Koch Chemie

  • Colourlock Artificial Leather Protector
  • Finish Spray Exterior
  • Rust Bloom Remover BMP
  • Cosmo-Clean
  • Antihologram Sponge orange, honeycomb
  • Colourlock Leather & Fur Wash Concentrate

More Pre-washing (Pretreatment) products

  • Bilt Hamber Touch-Less
  • Jax Wax Super Citrus Aerosol Cleaner
  • Inakano ALKALI
  • Luminus N-Prewash
  • Clean By Pan Decon Shampoo
  • Alchimy7 D7

Explore more

  • Category, comparison & dilution guides
  • What detailers actually use (video breakdowns)