CarPro Lift Dilution Ratios & User Guide

CarPro Lift dilution ratio and pH specification chart

리프트

CarPro Lift — Exterior : Foam, alkali pH, base dilution 1:10. At 1:10, mix about 100 ml of CarPro Lift per 1 L of water. For a foam cannon or an exact bucket amount, use the Find Your Detail dilution calculator on the product page: https://findyourdetail.io/products/carpro/lift

CarPro 리프트 — Exterior : Foam, pH alkali, 기본 희석 1:10. 1:10 기준 물 1L당 CarPro 리프트 약 100ml. 폼캐논이나 정확한 버킷 용량은 제품 페이지의 Find Your Detail 희석 계산기에서 계산하세요: https://findyourdetail.io/products/carpro/lift

Lift is a high-foaming pre-wash snow foam that uses a strong yet paint-safe alkaline formula to dissolve and lift heavy dirt and grime without any physical contact. Compatible with foam cannons and IK foam sprayers, it delivers a thorough touchless clean in a typical dwell time of about 5 minutes.

강력하면서도 도장면에 안전한 알칼리 포뮬러로 무접촉 방식의 세차를 가능하게 하는 고발포 프리워시 스노우 폼입니다. 폼 캐논과 IK 폼 분무기에 모두 사용할 수 있으며, 약 5분의 방치 시간만으로 심한 오염을 효과적으로 분해하고 제거합니다.

Brand
CarPro
Categories
Exterior : Foam
Primary dilution
1:10
pH
alkali (12)
Where to buy
Search on Amazon (US)
Seen in use
VOLVO S90 기본세차 | Maintenance Washing Detailing — The Luster
Last updated
2026-08-11

Key features

  • High-foaming pre-wash formula
  • Fully touchless cleaning method
  • Strong alkaline formula at about pH 12
  • Compatible with pressure foam lance washers
  • Dissolves and lifts heavy dirt and grime
  • Typical dwell time of about 5 minutes

Dilution

UseDilutionRatio
Exterior : Foam (primary)1:101:10

Usage

  1. Dilute Lift with water at about a 1:10 ratio, adjusting concentration for desired foam thickness.
  2. For a foam cannon, add up to about 3 oz of Lift to a 32 oz cannon or IK foam sprayer reservoir.
  3. Apply foam evenly across the vehicle and allow it to dwell for about 5 minutes.
  4. Rinse thoroughly with clean water, avoiding use in direct sunlight or allowing the product to dry.

핵심 특징

  • 고발포 프리워시 포뮬러
  • 완전 무접촉 세정 방식
  • 약 pH 12의 강력한 알칼리 포뮬러
  • 압력 폼 랜스 워셔 호환
  • 강한 오염 분해 및 제거
  • 약 5분의 표준 방치 시간

사용법

  1. Lift를 물과 약 1:10 비율로 희석하고, 원하는 발포 농도에 맞게 조정하세요.
  2. 폼 캐논 사용 시 32oz 캐논 또는 IK 폼 분무기에 Lift를 약 3oz까지 넣습니다.
  3. 폼을 차량 전체에 고르게 분사하고 약 5분간 방치합니다.
  4. 깨끗한 물로 충분히 헹구고, 직사광선 아래에서 사용하거나 건조되지 않도록 주의하세요.

Also known as: 카프로, Lift Snow Foam, CarPro Lift, Pre-Wash Foam, LIFT

한국어로 보기

Sources

  • CarPro official product page

Related products

More from CarPro

  • TarX Low VOC
  • WheelX
  • Immortal Gloss
  • Echo
  • MetalliCut
  • CQ Fabric

More Foam products

  • NANOSKIN TRI-FOAM POLISH
  • Superior Products Rainbow Foam Wax
  • Koch Chemie NanoMagic Polish
  • Koch Chemie Super Foam
  • FX Protect Active Foam
  • ValetPRO Foamula 1 – Thick Clingy pH Neutral Snow Foam Pre-Wash

Explore more

  • Category, comparison & dilution guides
  • What detailers actually use (video breakdowns)